Table of Contents
Advertisement
1. When session is started, the Start button turns to Stop.
2. The address block the OCR finds is highlighted with green color.
3. The selected sort plan is displayed in the status stripe.
4. Selected material type is shown in the status stripe.
5.4 Getting proper matches
The orientation of the shipment does not matter to the matching. The OCR can read upside down
or sideways text. But sometimes, especially when there is a small font, it is good to straighten the
shipment up to make it easier for the OCR. Many times, if the OCR does not match on the first
time, it is good to move and straighten the shipment a bit to get a proper match.
5.5 Touch ROI
If the OCR selects a wrong text block on the shipment, the Touch ROI functionality can be used.
The Touch ROI tells the OCR which block it should select on the shipment. The wanted area is
selected simply by tapping the screen in the middle of the address block.
It is also possible to drag from top left to bottom right to draw a rectangle, where the OCR looks
for the address. Typically this helps the OCR when there are line feeds in the address, or the
address is printed to a wide area on the shipment.
However, normally it is faster and therefore recommended to just tap the address.
Sende
Dav
Sende
Dav
User Manual
mSorter OCR
Updated 2019‐03‐15
Page 14/38
Advertisement
Table of Contents
