Sony Cyber-shot DSC-W580 Service Manual page 11

Put down the Shield Ring (C) into the Rotary Tube Block Assy.
qf
Note: Put down the Shield Ring (C) so that the pet side comes to the Eyepiece side.
Install the Tube Lubricating Block Assy while aligning the number on the Tube Lubricating Block Assy with the bump
qg
on the Rotary Tube Block Assy
Turn the Tube Lubricating Block Assy to align the U cutout and the convex part of the Tube Lubricating Block Assy..
qh
Tube Lubricating
Block Assy
Shield Ring (C)
Pet Side
Rotary Tube
Rotary Tube
Block Assy
Block Assy
Align the end of the Iris Flexible Board with the gear of the Rotary Tube Block Assy as shown in the figure below,
qj
and then install the Main Assy (B) while inserting the nine convex parts of the Main Assy (B) into the nine ditches
of the Tube Lubricating Block Assy.
Main Assy (B)
Eyepiece Side View
Convex
Parts
Main Assy (B)
Ditches
Tube Lubricating
Block Assy
DSC-W580_L2
Side View
Number
Bump
Eyepiece Side View
U Cutout
Convex
Part
Iris Flexible
Board
Convex
Parts
Convex
Parts
Ditches
Gear
Ditches
Install the Main Assy (A) while inserting the seven convex parts of the Main Assy (A) into the seven ditch
qk
of the Rear Mirror Plate.
Main Assy (A)
Turn the Tube Lubricating to the TELE state and insert the Iris Flexible Board into the cutout.
ql
Tube
Lubricating
Install the 3 Group Frame Block Assy and then install the 3 Group spring.
w;
3 Group Frame
Block Assy
3 Group Spring
1-9
Eyepiece Side View
Convex
Parts
Convex
Parts
Main Assy (A)
Convex Parts
Ditches
Ditches
Rear Mirror Plate
Ditches
Iris Flexible Board
Cutout
3 Group
Spring
Front View
3 Group
Spring