Introduction, Product Features & Specifications - Kidde KN-COP-DP-10YL-AQ-WF User Manual

Carbon monoxide alarm with indoor air quality monitor

Hide thumbs Also See for KN-COP-DP-10YL-AQ-WF:

Table of Contents

4. Introduction, Product Features and Specifications

Introduction

This alarm detects carbon monoxide using an electrochemical cell. The device also monitors the indoor

air quality of the residence. Many times throughout this User Guide, we will refer to Carbon Monoxide

as "CO." Ten (10) years after the unit was activated, this unit will automatically alert you that it is time to

replace the unit. This is called "End of Unit Life" mode. See Troubleshooting Guide. To help identify the

date to replace the unit, a label has been affixed to the side of the alarm. Write the "Install date" in the

space provided, and then write in the "Replace by" date (10 years from initial power up) in permanent

marker on the label prior to installing the unit. NOTE: AC power must be connected to obtain the

full 10 year battery and unit life. Two labels have been provided that have important information on

what to do in case of a CO alarm. Place one label at eye level on a wall near the alarm after it is mount-

ed, and one near a fresh air source such as a door or window.

This model supports bilingual American English/Canadian French languages for display messages.

The default is American English. The display language can be toggled by pressing the "Test" button

twice in succession. NOTE: All documentation is only available in American English.

Product Features and specifications:

• Temperature: Operating Range: 40°F (4.4°C) to 100°F (37.8°C)

• Humidity: Operating range: 10-95% RH non-condensing

• Audible Alarm: 85+ dB at 10' 3.0 to 3.5 KHz pulsing alarm

• CO Sensor: Electrochemical

• Indoor Air Quality Monitoring

NOTE: The indoor air quality sensors and features are not designed for life safety, and are not OSHA

or UL certified.These features offer additional notifications to the consumer, and will not affect life

safety performance (CO detection) of your Wi-Fi alarm.

• Powered by 120VAC (60 Hz, 90mA max) direct plug-in with sealed lithium battery backup

• Wi-Fi Compatible to Mobile Device ( Requires 802.11b/g/n (2.4GHz) Wi-Fi )

• Digital Display

Table of Contents