Introduction, Product Features & Specifications - Kidde P4010ACSCOAQ-WF User Manual

5. Introduction, Product Features and Specifications
Introduction
This alarm detects products of combustion using photoelectric technology and carbon monoxide using an electrochemi-
cal cell. The device also monitors the indoor air quality of the residence. Many times throughout this User Guide, we will
refer to Carbon Monoxide as "CO." Ten (10) years after the unit was activated, this unit will automatically alert you that
it is time to replace the unit. This is called "End of Unit Life" mode. See Troubleshooting Guide. To help identify the date
to replace the unit, a label has been affixed to the side of the alarm. Write the "Install date" in the space provided, and
then write in the "Replace by" date (10 years from initial power up) in permanent marker on the label prior to installing
the unit. noTe: AC power must be connected to obtain the full 10 year battery and unit life. Two labels have
been provided that have important information on what to do in case of a CO alarm. Place one label at eye level on a
wall near the alarm after it is mounted, and one near a fresh air source such as a door or window.
Product Features and Specifications:
• Temperature: Operating Range: 40°F (4.4°C) to 100°F (37.8°C)
• Humidity: Operating range: 10-95% RH non-condensing
• Audible Alarm: 85+ dB at 10' 3.0 to 3.5 KHz pulsing alarm, with voice messages
"Fire!" and/or "Warning! Carbon Monoxide"
• Smoke Sensor: Photoelectric
• CO Sensor: Electrochemical
• Indoor Air Quality Monitoring
NOTE: The indoor air quality sensors and features are not designed for life safety, and are not OSHA or UL certified.
These features offer additional notifications to the consumer, and will not affect life safety performance (smoke and
CO detection) of your Wi-Fi alarm.
• Voice message system
• Smoke Alarm SMART HUSH® Control
• Ambient Light Sensing
• Powered by 120VAC (60 Hz, 53 mA max) wire-in connector with sealed lithium battery backup
• Hardwire Interconnect
• Wi-Fi Compatible to Mobile Device ( Requires 802.11b/g/n (2.4GHz) Wi-Fi )
• One large, user-friendly button
8