Error Messages - Nikon CoolPix S710 User Manual

Error Messages

The following table lists the error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
Display
O (blinks)
B
N
Battery exhausted.
P
Battery temperature
high
Q (● blinks red)
P
Please wait for the
camera to finish recording.
N
Memory card is write
protected.
P
This card cannot be
used.
P
This card cannot be
read.
P
Card is not formatted.
Format card?
No
Yes
Problem
Clock not set.
Battery running low.
Battery exhausted.
Battery temperature is
high.
Camera cannot focus.
Camera cannot perform
other operations until
recording is complete.
Write-protect switch is in
"lock" position.
Error accessing memory
card.
Memory card has not been
formatted for use in
COOLPIX S710.
Solution
Set clock.
Prepare to charge or
change battery.
Charge or change battery.
Turn off camera, and allow
battery to cool down
before resuming use. After
5 seconds, this message
will disappear, the monitor
will turn off, and the flash
lamp will blink rapidly.
After the lamps blink for 3
minutes, the camera will
turn off automatically, but
you can also press the
power switch to turn it off
manually.
• Refocus.
• Use focus lock.
Wait until message clears
from display automatically
when recording is
complete.
Slide write-protect switch
to "write" position.
• Use approved card.
• Check that connectors
are clean.
• Confirm that memory
card is correctly inserted.
Choose Yes and press k
to format card.
A
117
12
12
15
24, 25
25
25
19
133
18
18
19
139