Camera Settings That Cannot Be Set At The Same Time - Nikon CoolPix S710 User Manual

Camera Settings that Cannot Be Set at the Same Time

Restrictions apply to the following settings in W, X, V and U modes.
Flash mode
Flash turns off at Continuous settings of Continuous, BSS or Multi-shot 16.
Applied setting is restored when Single is selected.
Self-timer
If self-timer is on, only one shot will be taken when shutter is released, regardless of
settings chosen for Continuous.
Applied Continuous settings are restored when picture is taken or self-timer is
turned off.
Continuous
If Continuous setting is set to Multi-shot 16, Image mode will be set to R
Normal (4352).
If Continuous mode is restored to any setting other than Multi-shot 16 the
settings for Image mode will also be restored.
ISO sensitivity
When ISO sensitivity is set to 6400 or 12800, Image mode cannot be set to Q
4352×3264, R 4352×3264, R 3264×2448, L 2592×1944, P 4352×2448, or
m 1920×1080. At these image mode settings, selecting 6400 or 12800 for ISO
sensitivity automatically switches the Image mode setting to M 2048×1536.
However, if the image mode is set to m1920×1080, the image mode will be
changed to N1024×768.
When any option other than 6400 or 12800 is next selected for ISO sensitivity,
the original image mode setting is restored. At an ISO sensitivity setting of 6400
or 12800, the Multi-shot 16 option (A 100) of the continuous shooting mode is
not available. At a Continuous setting of Multi-shot 16, selecting 6400 or 12800
for ISO sensitivity switches the Continuous setting to Single. The Continuous
setting does not change even when ISO sensitivity is set to options other than
6400 or 12800.
White balance
White balance is automatically set to Auto and cannot be adjusted when Black-
and-white, Sepia or Cyanotype is selected for Color options.
Applied white balance setting is restored when Standard color or Vivid color is
selected.
Shooting Options: The Shooting Menu
107