C Continuous - Nikon CoolPix S52 User Manual

Nikon coolpix s52: user guide
Hide thumbs Also See for CoolPix S52:
Table of Contents

Advertisement

C Continuous

Change settings to Continuous or Best Shot Selector (BSS). Flash will be switched
off when Continuous or BSS is selected. Focus, exposure, and white balance are
fixed at the values for the first picture in each series.
U
Single (default setting)
One picture is taken each time shutter-release button is pressed.
V
Continuous
While the shutter-release button is held down, pictures are taken at rate of up to
about 0.9 frames per second (fps) when image mode is set to
Shooting ends when the shutter-release button is released, or ten shots have been
taken with the shutter-release button held down.
j
BSS
BSS is recommended for shooting under low lighting without the flash, with the
camera zoomed in, or in other situations in which camera shake is likely to blur
pictures.
The camera takes up to ten pictures while the shutter-release button is held down.
The sharpest picture (picture with the most detail) in the series is automatically
selected and saved.
At settings other than Single, the indicator for the current setting is displayed in
the monitor (A 6).
B
Note on Continuous Shooting
The maximum frame rate with continuous shooting may vary, depending upon the current image
mode setting and the memory card used.
B
Note on Best Shot Selector
BSS may not produce the desired results if the subject moves or the composition changes while the
shutter-release button is pressed all the way down.
Shooting Options: The Shooting Menu
Normal (3456).
87

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents