Control Panel Oc-Top (Optional Equipment); Operating And Indicator Elements In The Oc-Top Control Panel - Dürkopp Adler Class 271 Instruction Manual

8.2 Control Panel OC-TOP (Optional Equipment)

8.2.1 Operating and Indicator Elements in the OC-TOP Control Panel

Functions of the Keys in the OC-TOP Control Panel
It is possible to turn functions on or off by briefly pressing keys on the control panel.
The functions are only then in effect on the machine if the corresponding devices (e.g.
solenoidal or electropneumatic sewing foot lift) are present.
Key Function
1 A +/- Programming key
1 B +/- Programming key
1 C +/- Programming key
1 D +/- Programming key
1 P +/- Programming key
1 S +/- Programming key
1 L +/- Programming key
2 Beginning bartack on/off
3 End bartack on/off
4 Bartack suppression or bartack
call up
If beginning or end bartack are
turned on, pressing the key will
turn off the next bartack.
If beginning or end bartack are off-
turned off, pressing the key will
turn the next bartack on.
5 (P/M) Manual sewing
Programmed sewing
Indicator
Change of the value in the display
Change of the value in the display
Change of the value in the display
Change of the value in the display
Change of the value in the display
Change of the value in the display
Change of the value in the display
LED in the key
LED in the key
LED in the key
The LED is lit when the
key is pressed. It becomes
dark when the next bartack is turned
on or off accordingly.
LED in the key dark
LED in the key lit
GB
61