Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Daiichi Electronics FTT2-91A
Summary of Contents for Daiichi Electronics FTT2-91A
- Page 1 Q-222-035 INSTRUCTION MANUAL FREQUENCY TRANSDUCER FTT2-91A 〔 MODEL B 〕...
-
Page 2: Safety Precautions
Q-222-035 Introduction Thank you for purchase of DAIICHI ELECTRONICS product. Please read this instruction manual carefully before use. Keep this manual for future reference. Please contact with us in case this manual is lost or damaged. Safety precautions Environment conditions ... - Page 3 Q-222-035 Countermeasures against troubles If trouble occurs within the warranty period, DAIICHI ELECTRONICS will repairs this product. Disposal Please dispose this product as industrial waste (non-combustible). Mercury parts and a nickel-cadmium battery are not used for this product.
-
Page 4: Table Of Contents
Q-222-035 Contents Safety precautions ･････････････････････････････････････････････････････････ 1. Features of product ･････････････････････････････････････････････････････ 2. Outline dimension ･･･････････････････････････････････････････････････････ 3. Bundled items ･･･････････････････････････････････････････････････････････ 4. Mounting method ･････････････････････････････････････････････････････････ 5. Connection ･･････････････････････････････････････････････････････････････ 6. Handling explanation ････････････････････････････････････････････････････ 7. Specification 7.1 Rating ･･････････････････････････････････････････････････････････････ 7.2 Performance ･････････････････････････････････････････････････････････ 7.3 Electrical strength, Mechanical strength ････････････････････････････ 7.4 Noise immunity ･･････････････････････････････････････････････････････... -
Page 5: Features Of Product
Q-222-035 1. Features of product Complied to JIS C 1111：2019 and IEC 60688：2012 Free power supply specifications compatible with 80 to 264 VAC and 80 to 264 VDC, and 24 VDC/48 VDC power supply specifications are available. Power consumption and weight have been reduced by about 50% compared to our conventional products. ... - Page 6 Q-222-035 Combination mounting dimension example (unit：mm) ■ Screw mounting ■ IEC/DIN rail mounting ①：40mm width transducer. ②：56mm width transducer. Please use rail of IEC, DIN technical standard 35mm width rail (strong type). 《Recommendation product》 Fuji Electric Co., Ltd. TH35-15AL ■ How to install this product in a IEC / DIN rail. The claw of the upside of the slot for rail mounting in the bottom of this product is put in a rail.
-
Page 7: Connection
Q-222-035 5. Connection Refer to the terminal name on the front name plate of the main unit, and connect according to the wiring diagram below or the wiring diagram name plate on the lower side of the main unit. Use the included M4 screws to connect the auxiliary power supply, input voltage, input current, output, and ground terminals. -
Page 8: Specification
Q-222-035 7. Specification 7.1 Rating Item Specification 45 to 55Hz ２ Frequency 55 to 65Hz Please specify 45 to 65Hz Input AC110V 50/60Hz ２ Voltage Please specify AC220V 50/60Hz Power consumption 0.2VA (AC110V), 0.5VA (AC220V) DC0 to 5V (600Ω or more) DC1 to 5V (600Ω... -
Page 9: Electrical Strength, Mechanical Strength
Q-222-035 7.3 Electrical strength, Mechanical strength Item Specification Between electric circuit and case (ground). Insulation Between auxiliary supply terminals and input, output 50MΩ or more at DC500V resistance terminals. Between input terminals and output terminals. Between electric circuit and case (ground). Voltage test Between auxiliary supply terminals and input, output AC2210V (50/60Hz) 5 seconds or... -
Page 10: Emc
Q-222-035 7.5 EMC Item Specification Contact discharge Electrostatic ±4kV (Charge voltage) Performance After test：Within EN61000-6-2 discharge immunity Air discharge standard：B inherent error EN61000-4-2 test ±8kV (Charge voltage) Frequency：① 80 to 1000MHz ② 1.4 to 2.0GHz Radiated, During testing： ③ 2.0 to 2.7GHz radio-frequency, Performance Within ±20% error... -
Page 11: Structure And Environmental Conditions
Q-222-035 7.6 Structure and environmental conditions Item Specification Material BOX：ABS(V-0), Terminal board：ABS(V-0), Terminal cover：Polycarbonate Color Munsell N1.5 (Black) External dimensions 40×120×130mm (W×H×D) Mass Approx. 250g Protection rating IP30 Operating temperature and -10 to 55℃ , 5 to 90% RH (Non condensing) humidity limits Storage temperature limits -40 to 70℃... -
Page 12: Calibration
Q-222-035 9. Calibration Because this product is adjusted, there is not need of calibration especially. However, if discrepancy arises in an output in long-term use, please adjust in the next way. Remove the terminal cover and VR cap before adjustment, and attach the VR cap and terminal cover after adjustment. (1) For the output load, connect an actual load (within the output load range indicated on the name plate) or a simulated load with the same resistance value as the actual load.