Related Manuals for Daiichi Electronics SPTT2-92A-12
Summary of Contents for Daiichi Electronics SPTT2-92A-12
- Page 1 Q-222-040 INSTRUCTION MANUAL POWER FACTOR TRANSDUCER SPTT2-92A-12 SPTT2-92A-33 SPTT2-92A-34 〔 MODEL B 〕...
-
Page 2: Safety Precautions
Q-222-040 Introduction Thank you for purchase of DAIICHI ELECTRONICS product. Please read this instruction manual carefully before use. Keep this manual for future reference. Please contact with us in case this manual is lost or damaged. Safety precautions Environment conditions ... - Page 3 Q-222-040 Countermeasures against troubles If trouble occurs within the warranty period, DAIICHI ELECTRONICS will repairs this product. Disposal Please dispose this product as industrial waste (non-combustible). Mercury parts and a nickel-cadmium battery are not used for this product.
-
Page 4: Table Of Contents
Q-222-040 Contents Safety precautions ･････････････････････････････････････････････････････････ 1. Features of product ･････････････････････････････････････････････････････ 2. Outline dimension ･･･････････････････････････････････････････････････････ 3. Bundled items ･･･････････････････････････････････････････････････････････ 4. Mounting method ･････････････････････････････････････････････････････････ 5. Connection ･･････････････････････････････････････････････････････････････ 6. Handling explanation ････････････････････････････････････････････････････ 7. Specification 7.1 Rating ･･････････････････････････････････････････････････････････････ 7.2 Performance ･････････････････････････････････････････････････････････ 7.3 Electrical strength, Mechanical strength ････････････････････････････ 7.4 Noise immunity ･･････････････････････････････････････････････････････... -
Page 5: Features Of Product
3. Bundled items ① Inspection certificate：1 (Packed in an envelope) ② Terminal screw in a bag. SPTT2-92A-12 M4 screw 4-piece set：1, M4 screw 5-piece set：1 SPTT2-92A-33 M4 screw 4-piece set：1, M4 screw 7-piece set：1 SPTT2-92A-34 M4 screw 4-piece set：2, M4 screw 5-piece set：1 4. - Page 6 Q-222-040 Combination mounting dimension example (unit：mm) ■ Screw mounting ■ IEC/DIN rail mounting ①：40mm width transducer. ②：56mm width transducer. Please use rail of IEC, DIN technical standard 35mm width rail (strong type). 《Recommendation product》 Fuji Electric Co., Ltd. TH35-15AL ■ How to install this product in a IEC / DIN rail. The claw of the upside of the slot for rail mounting in the bottom of this product is put in a rail.
-
Page 7: Connection
Use the included M4 screws to connect the auxiliary power supply, input voltage, input current, output, and ground terminals. 〔Applicable solderless terminal〕 Solderless terminal for M4 screw Outer diameter of terminal, 8.5mm or less Tightening torque：1.0 to 1.3 N･m SPTT2-92A-12 SPTT2-92A-33 SPTT2-92A-34 Input current Input current Input current... -
Page 8: Handling Explanation
Q-222-040 6. Handling explanation Please handle it correctly after paying attention to the following points. (1) When applying the auxiliary power supply and input, check that the voltage and input signal of the auxiliary power supply conform to the specifications of this product. (2）Make sure that the external wiring is connected to the specified terminal position (listed on the nameplate). -
Page 9: Performance
Q-222-040 7.2 Performance Item Specification Class index Response time 1 second or less Ripple 1%p-p or less Usage group I Fluctuation value ・Within the class index at 10 to 35℃ of influence due to ambient ・Within two times the class index at 0 to 45℃ temperature ・Within three times the class index at -10 to 55℃... -
Page 10: Electrical Strength, Mechanical Strength
Q-222-040 7.3 Electrical strength, Mechanical strength Item Specification Between electric circuit and case (ground). Insulation Between auxiliary supply terminals and input, output 50MΩ or more at DC500V resistance terminals. Between input terminals and output terminals. Between electric circuit and case (ground). Voltage test Between auxiliary supply terminals and input, output AC2210V (50/60Hz) 5 seconds or... -
Page 11: Emc
Q-222-040 7.5 EMC Item Specification Contact discharge Electrostatic ±4kV (Charge voltage) Performance After test：Within EN61000-6-2 discharge immunity Air discharge standard：B inherent error EN61000-4-2 test ±8kV (Charge voltage) Frequency：① 80 to 1000MHz ② 1.4 to 2.0GHz Radiated, During testing： ③ 2.0 to 2.7GHz radio-frequency, Performance Within ±20% error... -
Page 12: Structure And Environmental Conditions
Q-222-040 7.6 Structure and environmental conditions Item Specification Material BOX：ABS(V-0), Terminal board：ABS(V-0), Terminal cover：Polycarbonate Color Munsell N1.5 (Black) External dimensions 56×120×130mm (W×H×D) Mass Approx. 400g Protection rating IP30 Operating temperature and -10 to 55℃ , 5 to 90% RH (Non condensing) humidity limits Storage temperature limits -40 to 70℃... -
Page 13: Input And Output Relationship
Q-222-040 8. Input and output relationship LAG/LEAD polarity Power receiving (Power purchase) 0° Current of Current of leading phase lagging phase reference LEAD 270° 90° LEAD 180° Power transmission (Power selling) Polarity seen from the power receiving side even during power transmission (P＜0) (fixed V reference) LEAD 0.5 to LAG 0.5 OUTPUT... -
Page 14: Type Composition
Q-222-040 10. Type composition Power Factor Transducer (Single phase two wire / Three phase three wire) Type Specification code Type Specification code S P T T 2 - 9 2 A - 1 2 - ① ② ③ ④ ⑤ ⑥ S P T T 2 - 9 2 A - 3 3 - ①...