Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Daiichi Electronics FAETT2-92A-33
Summary of Contents for Daiichi Electronics FAETT2-92A-33
- Page 1 Q-222-030 INSTRUCTION MANUAL POWER FLOW CURRENT TRANSDUCER FAETT2-92A-33...
-
Page 2: Safety Precautions
Q-222-030 Introduction Thank you for purchase of DAIICHI ELECTRONICS product. Please read this instruction manual carefully before use. Keep this manual for future reference. Please contact with us in case this manual is lost or damaged. Safety precautions Environment conditions ... - Page 3 Q-222-030 Countermeasures against troubles If trouble occurs within the warranty period, DAIICHI ELECTRONICS will repairs this product. Disposal Please dispose this product as industrial waste (non-combustible). Mercury parts and a nickel-cadmium battery are not used for this product.
-
Page 4: Table Of Contents
Q-222-030 Contents Safety precautions ･････････････････････････････････････････････････････････ 1. Features of product ･････････････････････････････････････････････････････ 2. Outline dimension ･･･････････････････････････････････････････････････････ 3. Bundled items ･･･････････････････････････････････････････････････････････ 4. Mounting method ･････････････････････････････････････････････････････････ 5. Connection ･･････････････････････････････････････････････････････････････ 6. Handling explanation ････････････････････････････････････････････････････ 7. Specification 7.1 Rating ･･････････････････････････････････････････････････････････････ 7.2 Performance ･････････････････････････････････････････････････････････ 7.3 Electrical strength, Mechanical strength ････････････････････････････ 7.4 Noise immunity ･･････････････････････････････････････････････････････... -
Page 5: Features Of Product
Q-222-030 1. Features of product Complied to JIS C 1111：2019 and IEC 60688：2012 Free power supply specifications compatible with 80 to 264 VAC and 80 to 264 VDC, and 24 VDC/48 VDC power supply specifications are available. Power consumption and mass are reduced by approximately 50% compared to our conventional products, and miniaturization has also been achieved. - Page 6 Q-222-030 Combination mounting dimension example (unit：mm) ■ Screw mounting ■ IEC/DIN rail mounting ①：40mm width transducer. ②：56mm width transducer. Please use rail of IEC, DIN technical standard 35mm width rail (strong type). 《Recommendation product》 Fuji Electric Co., Ltd. TH35-15AL ■ How to install this product in a IEC / DIN rail. The claw of the upside of the slot for rail mounting in the bottom of this product is put in a rail.
-
Page 7: Connection
Q-222-030 5. Connection Refer to the terminal name on the front name plate of the main unit, and connect according to the wiring diagram below or the wiring diagram name plate on the lower side of the main unit. Use the included M4 screws to connect the auxiliary power supply, input voltage, input current, output, and ground terminals. -
Page 8: Handling Explanation
Q-222-030 6. Handling explanation Please handle it correctly after paying attention to the following points. (1) When applying the auxiliary power supply and input, check that the voltage and input signal of the auxiliary power supply conform to the specifications of this product. (2）Make sure that the external wiring is connected to the specified terminal position (listed on the nameplate). -
Page 9: Specification
Q-222-030 7. Specification 7.1 Rating Item Specification Power transmission / Power receiving AC0 to 1A ２ Power flow current Please specify Power transmission / Power receiving AC0 to 5A AC110V 50/60Hz Rated voltage ２ Please specify AC220V 50/60Hz Input AC 1 A 50/60Hz ２... -
Page 10: Electrical Strength, Mechanical Strength
Q-222-030 7.3 Electrical strength, Mechanical strength Item Specification Between electric circuit and case (ground). Insulation Between auxiliary supply terminals and input, output 50MΩ or more at DC500V resistance terminals. Between input terminals and output terminals. Between electric circuit and case (ground). Voltage test Between auxiliary supply terminals and input, output AC2210V (50/60Hz) 5 seconds or... -
Page 11: Emc
Q-222-030 7.5 EMC Item Specification Contact discharge Electrostatic ±4kV (Charge voltage) Performance After test：Within EN61000-6-2 discharge immunity Air discharge standard：B inherent error EN61000-4-2 test ±8kV (Charge voltage) Frequency：① 80 to 1000MHz ② 1.4 to 2.0GHz Radiated, During testing： ③ 2.0 to 2.7GHz radio-frequency, Performance Within ±20% error... -
Page 12: Structure And Environmental Conditions
Q-222-030 7.6 Structure and environmental conditions Item Specification Material BOX：ABS(V-0), Terminal board：ABS(V-0), Terminal cover：Polycarbonate Color Munsell N1.5 (Black) External dimensions 56×120×130mm (W×H×D) Mass Approx. 400g Protection rating IP30 Operating temperature and -10 to 55℃ , 5 to 90% RH (Non condensing) humidity limits Storage temperature limits -40 to 70℃... -
Page 13: Input And Output Relationship
Q-222-030 8. Input and output relationship OUTPUT OUTPUT OUTPUT [V][mA] [V][mA] [V] [mA] 5 20 3 12 2.5 0.5 -5 -1 5 [A] 5 [A] 5 [A] INPUT INPUT INPUT 1 [A] 1 [A] 1 [A] Power Power Power Power Power Power transmission... -
Page 14: Type Composition
Q-222-030 10. Type composition Power Flow Current Transducer Type Specification code F A E T T 2 - 9 2 A - 3 3 - ① ② ③ ④ ⑤ ３ ① Model ② Input ( ③ Rated voltage Model B Power transmission AC1 to 0A AC100V Power receiving AC0 to 1A...