Connecting to a Printer
Connecting the Camera and Printer
1
Turn off the camera.
2
Turn on the printer.
Check printer settings.
3
Connect the camera to the printer using the supplied audio
video/USB cable.
4
Turn on the camera.
When connected correctly, the PictBridge start-up
screen 1 will be displayed in the camera monitor.
Then the print selection screen will be displayed 2.
1
j
Connecting the Audio Video/USB Cable
When connecting the audio video/USB cable, be sure that the connectors are oriented cor-
rectly. Do not use force when connecting the audio video/USB cable. When disconnecting the
audio video/USB cable, do not pull the connector at an angle.
78
2
Print selection
w
15/11
2007
NO. 1
[
57]