Factory Reset; Formatting The Inserted Micro Sd Card - NanoCamPlus NCP-DVRGWS User Manual

Full hd dash camera with 3.0 ips screen, gps & wifi
Table of Contents

Advertisement

16.11 FACTORY RESET

Follow these instructions to restore factory settings, also known as Factory Reset:
Highlight to select the Factory Reset function and press OK to confirm.
A screen listing options of ON or OFF will present. To restore to original factory settings
press ON.
Use the Up or Down arrow to choose. Highlight to select your preference and press OK
to confirm.
When compete, press the Menu button to return to the main options.

16.12 FORMATTING THE INSERTED MICRO SD CARD

Formatting the Micro SD card will delete all information on the inserted Micro SD card and
prepare the card for use with the Dash Camera.
To carry out this operation, please follow these instructions:
Enter the General Settings Menu.
Use the Up and Down Buttons to navigate the Settings Menu and highlight the Format
Micro SD card option.
Press OK to access the Format Micro SD card settings.
You will be asked if you if you want to Format the Micro SD card.
Highlight the YES option and press OK.
Press Menu to return to the main section.
32

Advertisement

Table of Contents
loading

Related Products for NanoCamPlus NCP-DVRGWS

Table of Contents