Reset The Dash Camera; Playing Back Video On A Computer Or Laptop (Pc); Information On Your Dash Camera Settings - NanoCamPlus NCP-DVRGWS User Manual

7.0

RESET THE DASH CAMERA

Resetting the Dash Camera can help when the unit isn't functioning as it should. To reset the
Dash Camera, with a flattened paper clip press the small button on its underside.
8.0

PLAYING BACK VIDEO ON A COMPUTER OR LAPTOP (PC)

To playback video files on your PC, remove the Micro SD from the Dash Camera and connect it
directly to your PC using a USB Micro SD card reader, a built-in card reading slot or a Micro SD/SD
card converter (also not included).
Once the Micro SD card is connected, a folder named 'removable storage Dash Camera,' should
appear. By transferring and saving files onto your computer, often playback of your recordings is
quicker and smoother.
9.0

INFORMATION ON YOUR DASH CAMERA SETTINGS

Before using the Dash Camera, it is critical that you insert and format your Micro SD card and
set the Time and Date via the Dash Camera's settings (instructions to do this are on page 32).
FUNCTION, MODE AND USAGE NOTES:
• Menu options can not be used while the camera is recording, so please cancel recording
first.
• The Time and Date will be stamped onto your footage using the Date Stamp setting.
• When the Dash Camera is connected (via the supplied adaptor) to your vehicle's 12/24V
power supply, it will automatically power on and begin recording.
14