Nikon CoolPix 300 Quick Start Manual page 3

3. A serial or SCSI cable
4. AV cables
3
Checklist—Before you begin
You may connect the COOLPIX 300 to a
computer through the either the SCSI or serial
interfaces. The serial interface is slower than
SCSI, but is a simpler connection. The camera is
supplied with serial cables for PC and Macintosh.
If using the serial connection make sure that you
use the correct cable. If your PC or Mac has more
than one serial port, the Nikon View software will
allow you to chose the correct port for input.
If you wish to use SCSI and do not own a
Macintosh, your will require a SCSI adaptor card
for your PC. A SCSI cable kit for the COOLPIX
300 is available as an accessory and can be
purchased separately.
The COOLPIX 300 SCSI cable kit includes a
SCSI-1 type connector cable and an adaptors for
use with Macintosh and SCSI-2 type connectors.
The COOLPIX 300 has audio and video outputs
for video recording or live playback of pictures
and sounds through a TV.
The COOLPIX 300 is supplied with an AV lead
for this purpose.