Advertisement
Available languages
Available languages
10
Loosen the set screw on the focuser. Remove the plastic cap cover-
ing the end of the focuser.
13
Loosen the two Philips-head screws on the side of the finderscope
and slide the clamp over the dovetail bracket. Secure the finderscope in
place by tightening the two Philips-head screws.
16
You are now ready to start using your AstroMaster telescope.
11
Insert the diagonal into the focuser and tighten the set screw.
14
On/Off
Switch
Remove the small plastic tab under the battery cover by pulling it
straight out. For longer battery life be sure to turn off finderscope
when not in use.
12
Insert the chrome barrel of the 20mm eyepiece into the diagonal
and tighten the set screw.
15
Battery
Cover
Remove the lens cap from the front of the telescope before you
begin observing.
Advertisement
