Table of Contents
Advertisement
6.
OPERATING INSTRUCTION
OPERATION SWITCH INFORMATION
• To power on, turn on the switch at the top of the unit to low or high cooling for operation.
There are 2 options:
1. Low Cooling - Sends a flow of cold air at low fan speed.
2. High Cooling - Sends a flow of cold air at high fan speed.
• Swing swithch.
Press on and the two cold ducts will automatically oscillate.
Press off to stop.
NOTIFICATION
• If you use the unit out of the temperature range, it may not work properly.
• Do not overload the electrical system by using too many devices off one outlet.
• COMPRESSOR OVERLOAD / OVERHEAT PROTECTION
If the compressor overheats or overloads due to high or low voltage or high ambient temperature,
the built in safety protection for the compressor will start working and turn off the unit.
NOTIFICATION
When the overload protection is working, the air flow from the unit will be at the ambient temperature of
the room, but will not cool the air.
If overload protection works frequently, find out, and fix the problem before using the unit.
SWING SWITCH
HIGH
ON
LOW
OFF
OFF
POWER
KOOLZONE
9
Advertisement
Table of Contents
