Panasonic MC-SB33J Operating Instructions Manual page 10

Vacuuming
1
To start it up
Press
■ To change the strength
ON : Normal vacuuming
HIGH : To vacuum with high suction power
2
To shut it off
Press
3
Charge the battery after use.
(P. EN8)
●
Request
Do not use force on the nozzle, and move it lightly and slowly along tatami mats and wood flooring.
Move it back and forth on carpets. Debris can easily be taken up by pulling the nozzle towards yourself.
(When vacuuming soft and easy to scratch floors such as cedar, cypress and vinyl floors, etc. and when floor
waxes and polishing floor detergents are being used on them, the floors might get scratched up.)
■ The battery status indicator lamp lights up to let you know!
It indicates the remaining battery level while you are vacuuming.
EN10
(Operation starts in ON mode)
The floor nozzle brushes are rotating
(The rotating cannot be stopped)
The operating mode changes
each time the button is pressed.
HIGH ON
Note
Lights up (blue)
There is enough battery power. You can vacuum.
Flashing (blue)
The battery power is low. Charge it. (P. EN8)
●
If the battery runs out during operation, the over-discharge
prevention device will automatically stop the battery.