LG PRVC1 Installation Manual page 13

10. Connect the wire of control signal of Damper Actuator of Master Unit to CN_AO(AO_01(A+)) and connect the
wire of control signal of Damper Actuator of Slave Unit to CN_AO(AO_02(B+))
11. Set up the main function dip switch of LAC PCB.
Step 10
AC 24V Power
for Damper Actuator
of Master & Slave
Slave(AO_02(B+))
12. Set up the dip switch of MAIN outdoor unit PCB.
13. Using the clamp and tie provided securely attach the wire as shown in the figure.
Step 12
SW01B
ON
1 2 3 4 5 6 7
Master(AO_01(A+))
DC 0~10V Control Signal
for Damper Actuator
of Master & Slave
SW02B
ON
1 2 3 4 5 6 7
Step 11
ON
1 2 3 4
Step 13
Installation Method
Installation manual 13