Selecting A City Center As The Destination - Nextar ME Software Instruction Manual

•
If only a few intersecting streets exist, their list appears
immediately.
•
In case of a longer street, a keyboard screen appears.
Start entering the name of the intersecting street on the
keyboard. As you type, if the matching streets can be
shown on one screen, their list appears automatically.
6. Tap the desired intersecting street in the list.
7. The map appears with the selected point in the middle. Tap
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.

3.1.2.5 Selecting a city center as the destination

The City Center is not the geometric center of the city but an arbitrary
point the map creators have chosen. In towns and villages, it is usually
the most important intersection; in larger cities, it is an important
intersection.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
,
2. By default, Nextar Navigation System proposes the
country/state and city where you are. If needed, tap the button
with the name of the country/state, and select a different one
from the list.
3. If needed, change the city:
•
To select the city from the list of recently used ones, tap
the
(Simple mode) or
(Advanced mode).
button.
47
(Simple mode), or