Entering An Address If House Numbering Is Restarted - Nextar ME Software Instruction Manual

4. Select the street from the list.
6. Enter the house number:
1. Tap
2. Enter the house number on the keyboard.
3. Tap
7. The map appears with the selected point in the middle. Tap
(Advanced mode) from the Cursor menu. The route is then
automatically calculated, and you can start navigating.

3.1.2.2 Entering an address if house numbering is restarted

There are long roads where house numbering is restarted at some
point. This way the same house number can appear twice or even
more times on the same road. If this is the case, after entering the
house number, you need to select the appropriate address by the
district/suburb information.
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
,
•
After entering a couple of characters, the names
that match the string appear in a list.
•
Tap
before it appears automatically.
(Simple mode) or
(Advanced mode).
to open the list of results
.
to finish entering the address.
41
(Simple mode), or