Configuring The Printer For The Network With The Operation Panel - Aficio AP1015 Operating Instructions Manual

2. Configuring the Printer for
Configuring the Printer for the Network
with the Operation Panel
After installing the optional Network
Interface Board, configure it for the
network using the printer's operation
panel.
If you use TCP/IP, you should assign
the IP Address and Subnet Mask. You
can also set the Gateway Address us-
ing the printer's operation panel.
Note
When you turn the machine's pow-
er switch on, it takes about two
minutes to recognize the optional
Network Interface Board. If the "2.
Network Setup" in the following
step 4. is grayed out, wait for about
two minutes.
Reference
For more information about using
this machine as a network printer,
see "Quick Configuration Guide"
which is included as a PDF file on
the CD-ROM labeled "Printer
Drivers and Utilities".
A
Press { { { { User Tools/Counter} } } } .
Dial
k Dial
se/
ial
the Network
B
Press the 0 0 0 0 or 1 1 1 1 key until the fol-
lowing message appears on the
panel display.
C
Press { { { { OK} } } } .
The following screen appears on
the panel display.
D
Press the 0 0 0 0 or 1 1 1 1 key until the fol-
lowing message appears on the
panel display.
E
Press { { { { OK} } } } .
The following screen appears on
the panel display.
F
Press { { { { OK} } } } .
The following screen appears on
the panel display.
13
Draft 2001/01/24