Four-Faith F-G100 Series User Manual page 20

BGP
RIP2 Router
OSPF Router
Router
Note: There may be different options for different version.
Select set number: 1-50
Route Name: defined routing name by users, up to 25 characters
Metric: 0-9999
Destination LAN NET: the Destination IP Address is the address of the network or host to which
users want to assign a static route
Subnet Mask: the Subnet Mask determines which portion of an IP address is the network portion,
and which portion is the host portion
Gateway: IP address of the gateway device that allows for contact between the Router and the
network or host.
Interface: indicate users whether the Destination IP Address is on the LAN & WLAN (internal
wired and wireless networks), the WAN (Internet), or Loopback (a dummy network in which one
PC acts like a network, necessary for certain software programs)
Show Routing Table
Choose BGP if need to use
BGp
Choose RIP2 Router if need to
use RIP
Choose OSPF router if need to
use OSPF
Choose Router if another
router exists on their network