Four-Faith F8926-GW Series User Manual

Lorawan gateway

Hide thumbs

Table Of Contents

Table of Contents

Table of Contents
Chapter 1 Product Introduction
Chapter 2 Installation
Chapter 3 Configuration
- Connect with the F8926-GW
- Access to Configuration
- Web Configuration
  - Setup
    
    Basic Setup
    
    Ddns
    
    MAC Address Clone
    
    Advanced Routing
    
    Networking
  - Wireless
    
    Basic Settings
    
    Wireless Security
  - Services
  - Vpn
    
    Pptp
    
    L2Tp
    
    Openvpn
    
    Ipsec
    
    Gre
  - Security
    
    Firewall
  - Access Restrictions
    
    WAN Access
    
    URL Filter
    
    Packet Filter
  - Nat
    
    Port Forwarding
    
    Port Range Forwarding
    
    Dmz
  - Qos
    
    Basic
    
    Classify
  - Application
    
    Serial Applications
    
    Lorawan Application
  - Admin
    
    Management
    
    Keep Alive
    
    Commands
    
    Factory Defaults
    
    Firmware Upgrade
    
    Backup
  - Status
    
    Router
    
    Wan
    
    Lan
    
    Wireless
    
    Bandwidth
    
    System Info

Quick Links

Download this manual

F8926-GW LoRaWAN

Gateway User Manual

F8926-GW LoRaWAN Gateway

F8926-GW-W

F8926-GW-FL

F8926-GW-L

Document Version

Model：F8926-GW

User Manual

Model

LoRa+WCDMA+WIFI Router

LoRa+LTE FDD+WIFI Router

LoRa+LTE+WIFI Router

Four-Faith Corporation

Add：11th Floor, A-06 Area, No.370, Chengyi Street, Jimei,

Xiamen, Fujian, China.

Tel：+86 592-5907276 Fax: +86 592-5912735

Web: en.four-faith.com

V1.0.0

Need help?

Do you have a question about the F8926-GW Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Four-Faith F8926-GW Series

Page 1 Model：F8926-GW Total: 77 F8926-GW LoRaWAN Gateway User Manual Model Category F8926-GW-W LoRa+WCDMA+WIFI Router F8926-GW-FL LoRa+LTE FDD+WIFI Router F8926-GW-L LoRa+LTE+WIFI Router Four-Faith Corporation Add：11th Floor, A-06 Area, No.370, Chengyi Street, Jimei, Xiamen, Fujian, China. Tel：+86 592-5907276 Fax: +86 592-5912735 Web: en.four-faith.com...
Page 2 F8926-GW User Manual Files Revised Record Date Version Remark Author 2019.2.19 V1.0.0 Initial version F8926-GW-V1.0.0 en.four-faith.com Page 2 of 78...
Page 3 All contents in the files are protected by copyright law, and all copyrights are reserved by Xiamen Four-Faith Communication Technology Co., Ltd. Without written permission, all commercial use of the files from Four-Faith are forbidden, such as copy, distribute, reproduce the files, etc., but non-commercial purpose, downloaded or printed by individual (all files shall be not revised, and the copyright and other proprietorship notice shall be reserved) are welcome.
Page 4 F8926-GW User Manual F8926-GW-V1.0.0 en.four-faith.com Page 4 of 78...
Page 5: Table Of Contents
3.3.4.4 IPSEC ....................48 3.3.4.5 GRE ....................50 3.3.5 Security ...................... 52 3.3.5.1 Firewall ..................... 52 3.3.6 Access Restrictions ..................54 3.3.6.1 WAN Access ..................54 3.3.6.2 URL Filter ..................56 3.3.6.3 Packet Filter ..................57 F8926-GW-V1.0.0 en.four-faith.com Page 5 of 78...
Page 6 3.3.10.5 Firmware Upgrade ................. 67 3.3.10.6 Backup ................... 67 3.3.11 Status ......................69 3.3.11.1 Router..................... 69 3.3.11.2 WAN ....................70 3.3.11.3 LAN ....................71 3.3.11.4 Wireless ..................72 3.3.11.5 BandWidth ..................74 3.3.11.6 System Info ..................76 F8926-GW-V1.0.0 en.four-faith.com Page 6 of 78...
Page 7: Chapter 1 Product Introduction
◆ Antenna lightning protection Standard & Easy-To-Use ◆ Standard RS232 (or RS485/RS422), ethernet and WIFI interfaces ◆ Standard WAN/LAN port (support standard PPPOE protocol) ◆ Automatically enter into transmission status after power-on ◆ Powerful central management software F8926-GW-V1.0.0 en.four-faith.com Page 7 of 78...
Page 8: Hardware Block Diagram
◆ Support DHCP server and DHCP client ◆ Support TCP/IP, UDP, FTP and HTTP network protocols ◆ Support SPI firewall, VPN, access control and URL filter functions ◆ Support wireless data transmission by LoRa 1.3 Hardware Block Diagram F8926-GW-V1.0.0 en.four-faith.com Page 8 of 78...
Page 9: Specifications
RXD ≤ 390mA@12V PHYSICAL PROPERTIES Dimensions 157.0x97.0x25.0 mm (excluding antennas and mountings) Weight 510g (excluding antennas, accessories and POE power) Shell IP30 OTHERS -35~+75ºC Operating Temperature -40~+85ºC Storage Temperature Relative Humidity 95% (non-condensing) Certifications F8926-GW-V1.0.0 en.four-faith.com Page 9 of 78...
Page 10: Chapter 2 Installation
Chapter 2 Installation 2.1 General Packing List F8926-GW must be installed correctly and the installation must be conducted by a qualified engineer recognized by Four-Faith. ➢ Warning: 1. Power off before installation 2. Don’t remove the cover, power interface and antenna interface Before you install the F8926-GW, please check the package contents and make sure it completely.
Page 11: Product Overview
1. Drill 2 holes of ø35mm diameter, 3~4mm depth according to the position of the bracket. ◆ Requirement: 1. the wall should be flat; 2. must be in an open area 3. make sure no shield within 5 meters F8926-GW-V1.0.0 en.four-faith.com Page 11 of 78...
Page 12: Antenna Installation
After F8926-GW is installed on the bracket, then install all antennas (4G,WIFI and LoRa), make sure all antennas are tightened to get best signal. 2.3.3 SIM/UIM Card Installation 1. Press the button beside the SIM/UIM card slot, then the SIM/UIM card slot will popup automatically. F8926-GW-V1.0.0 en.four-faith.com Page 12 of 78...
Page 13: Network Cable Connection
F8926-GW, and the other side connect to the ethernet port of another network device. The network cable connection line sequence as follows: RJ45-1 RJ45-2 Color white & orange orange white & green blue white & blue green white & brown brown F8926-GW-V1.0.0 en.four-faith.com Page 13 of 78...
Page 14: Console Cable Connection
Online Status Offline LoRa connect normal LoRa LoRa Status LoRa connect abnormal Connected WAN/LAN WAN/LAN Status Not connected Flash Communicating Connected Not connected LAN Status Flash Communicating WIFI on WIFI WIFI Status WIFI off F8926-GW-V1.0.0 en.four-faith.com Page 14 of 78...
Page 15: Reset Button
2.5 Reset Button If you want to reset the system, please press the “Reset Button” 15 seconds slightly, then it will restore the configuration parameters factory, and it will reboot automatically after 5 seconds. F8926-GW-V1.0.0 en.four-faith.com Page 15 of 78...
Page 16: Chapter 3 Configuration
3.1 Connect with the F8926-GW Before configuration, you can connect the base station with a PC by WIFI or network cable. ◆ Connect the base station by WIFI (based on WIN10 operator system); F8926-GW-V1.0.0 en.four-faith.com Page 16 of 78...
Page 17 F8926-GW User Manual ◆ Connect the base station by network cable (based on WIN10 operator system) F8926-GW-V1.0.0 en.four-faith.com Page 17 of 78...
Page 18: Access To Configuration
F8926-GW User Manual 3.2 Access to configuration pages Four-Faith LoRaWAN base station provides web configuration management. You can access to the configuration pages fellow these steps: 1. Open browser (such as google, IE or others) 2. Input “192.168.1.1” in the search bar, and then it will enter into the configuration login page when connect F8926-GW correctly.
Page 19: Web Configuration
Disable the WAN port connection setting. Mode 2: Static IP Select the “Static IP” connection type, this page will auto refresh and then show the configuration parameters as follow: Warning: you need prepare a public IP address. F8926-GW-V1.0.0 en.four-faith.com Page 19 of 78...
Page 20 Warning: you need to fill in the username and password to take it effect. Mode 5: 3G/UMTS/4G/LTE Select the “3G/UMTS/4G/LTE” connection type, this page will auto refresh and then show the configuration parameters as follow: F8926-GW-V1.0.0 en.four-faith.com Page 20 of 78...
Page 21 Warning: In this mode, the IP address of WAN port assigned by dhcp-4G (default). Parameters Option Description User Name Sim card account assigned by operator Password Sim card account assigned by operator APN number assigned by operator F8926-GW-V1.0.0 en.four-faith.com Page 21 of 78...
Page 22 “Keep Online Detection” set “Ping” or “Router” mode Turn on restart the device when dial-up failure Enable Dial Failure to Enable function Restart Disable Turn off restart the device when dial-up failure F8926-GW-V1.0.0 en.four-faith.com Page 22 of 78...
Page 23: Ddns
According to server types Default OFF. If you select “ON”, it means Wildcard “.host.3322.org” equal to “host.3322.org” Do not use external Turn on or off external IP check function IP check Force Update Interval Default 10 days. F8926-GW-V1.0.0 en.four-faith.com Page 23 of 78...
Page 24: Mac Address Clone
“Gateway” mode is recommended. Mode 1: Gateway Select the “Gateway” mode, this page will auto refresh and then show the configuration parameters as follow: Delete the specified static route Show all static route settings F8926-GW-V1.0.0 en.four-faith.com Page 24 of 78...
Page 25 IPSEC Mode 2: BGP Select the “BGP” mode, this page will auto refresh and then show the configuration parameters as follow: Delete the specified static route Show all static route settings F8926-GW-V1.0.0 en.four-faith.com Page 25 of 78...
Page 26 According the position of IP Interface address, you can select suitable interface IPSEC Mode 3: RIP2 Router Select the “RIP2 Router” mode, this page will auto refresh and then show the configuration parameters as follow: F8926-GW-V1.0.0 en.four-faith.com Page 26 of 78...
Page 27 Static Routing LAN NET or host address Subnet Mask The subnet mask of router Gateway The gateway of router LAN & WAN According the position of IP Interface address, you can select suitable interface IPSEC F8926-GW-V1.0.0 en.four-faith.com Page 27 of 78...
Page 28 OSPF Config GUI or vtysh command configure Style Vtysh OSPF OSPF configuration Configuration OSPF Routing Bird Config GUI or vtysh command configure Style Vtysh Enable Enable bird log Bird Log Disable Disable bird log F8926-GW-V1.0.0 en.four-faith.com Page 28 of 78...
Page 29 IPSEC Mode 5: Router Select the “Router” mode, this page will auto refresh and then show the configuration parameters as follow: Delete the specified static route Show all static route settings F8926-GW-V1.0.0 en.four-faith.com Page 29 of 78...
Page 30: Networking
You can create a new bridge. The smallest Create Bridge Bridge No. number has the highest priority Allow you specify any interface in an Assign to Bridge established bridge Current Bridging Table Show all current bridge list F8926-GW-V1.0.0 en.four-faith.com Page 30 of 78...
Page 31 (wireless) to br1 as follow: Notice: the main function of bridge is used for LAN port, the WAN interface should not be bound. Step 6. If bind successful, it will show on the “Current Bridging Table” as follow: F8926-GW-V1.0.0 en.four-faith.com Page 31 of 78...
Page 32: Wireless
Wireless transmission can bridge the relay bridge communication between two or more networks Hybrid Support 802.11b/g/n standard devices Wireless Bg-mix Support 802.11b and 802.11g standard devices Network Mode NG-mix Support 802.11g and 802.11n standard devices F8926-GW-V1.0.0 en.four-faith.com Page 32 of 78...
Page 33: Wireless Security
Interfaces” bar to add virtual interface, as fellow: 3.3.2.2 Wireless Security It has 7 wireless security modes. Default disable it. If you want to change the wireless security mode, please click the “Apply Settings” button to take it effect. F8926-GW-V1.0.0 en.four-faith.com Page 33 of 78...
Page 34 Input the network port of radius server Server Port Radius Auth Shared secret key between router and radius server Shared Secret Key Renewal 1-99999. Secret key update time interval, default Interval (in 3600 seconds) F8926-GW-V1.0.0 en.four-faith.com Page 34 of 78...
Page 35 Input the network port of radius server Server Port Radius Auth Shared secret key between router and radius server Shared Secret Key Renewal 1-99999. Secret key update time interval, default Interval (in 3600 seconds) F8926-GW-V1.0.0 en.four-faith.com Page 35 of 78...
Page 36 Input the network port of radius server Server Port Radius Auth Shared secret key between router and radius server Shared Secret Key Renewal 1-99999. Secret key update time interval, default Interval (in 3600 seconds) F8926-GW-V1.0.0 en.four-faith.com Page 36 of 78...
Page 37 Secret key is HEX code Generate the secret key. Combine with letters and Passphrase characters Key 1 Secret key 1 Key 2 Secret key 2 Key 3 Secret key 3 Key 4 Secret key 4 F8926-GW-V1.0.0 en.four-faith.com Page 37 of 78...
Page 38: Services
Disable Disable it You can set extra options, such as: dhcp-host = AB:CD:EF:11:22:33, 192.168.0.10, Additional myhost, myhost.domain, 12h; DNSMasq Options dhcp-lease-max = 2; dhcp-range = 192.168.0.110, 192.168.0.111, 12h F8926-GW-V1.0.0 en.four-faith.com Page 38 of 78...
Page 39 ◆ SSHD You can remote access your router by SSH client when you are enable the SSHD service. Parameters Option Description Enable Turn on this service SSHD Disable Turn off this service F8926-GW-V1.0.0 en.four-faith.com Page 39 of 78...
Page 40 Telnet is a terminal simulation protocol that usually used to network which based on TCP/IP. It can log in remote device and run the program by PC. ◆ WAN Traffic Counter Traffic statistics function. F8926-GW-V1.0.0 en.four-faith.com Page 40 of 78...
Page 41: Vpn
PPTP server. It should not be the same as the LAN port The IP address assigned to the client. Client IP(s) Format is: xxx.xxx.xxx.xxx-xxx The client’s username and password. CHAP-Secrets Format is: user * password * F8926-GW-V1.0.0 en.four-faith.com Page 41 of 78...
Page 42 Turn off network address translation function You need input fixed IP address. Enable Fixed IP Disable Dynamic assign IP address User Name The allowed username of PPTP server Password The corresponding password of PPTP server F8926-GW-V1.0.0 en.four-faith.com Page 42 of 78...
Page 43: L2Tp
The IP address assigned to the client. Client IP(s) Format is: xxx.xxx.xxx.xxx-xxx.xxx.xxx.xxx Tunnel Authentication The tunnel authentication key Password The client’s username and password. CHAP-Secrets Format is: user * password * ◆ L2TP Client F8926-GW-V1.0.0 en.four-faith.com Page 43 of 78...
Page 44 The maximum transmission unit. Range: 0-1500 The maximum receive unit. Range: 0-1500 Enable Turn on network address translation function Disable Turn off network address translation function Fixed IP Enable You need input fixed IP address. F8926-GW-V1.0.0 en.four-faith.com Page 44 of 78...
Page 45: Openvpn
Require CHAP encryption authentication Require CHAP Not require CHAP encryption authentication Refuse PAP encryption authentication Refuse PAP Not refuse PAP encryption authentication Require authentication Require Authenticaiton Not require authentication 3.3.4.3 OPENVPN ◆ OpenVPN Server F8926-GW-V1.0.0 en.four-faith.com Page 45 of 78...
Page 46 SHA1 algorithm SHA256 SHA256 algorithm Hash Algorithm SHA512 SHA512 algorithm MD5 algorithm Enable Advanced options configuration Advanced Options Disable Disable advanced options configuration A common CA certificate for both the server and CA Cert client F8926-GW-V1.0.0 en.four-faith.com Page 46 of 78...
Page 47 The listening port of OpenVPN server Router mode Tunnel Device Bridge mode UDP protocol Tunnel Protocol TCP protocol Blowfish CBC Blowfish encryption AES-128 CBC AES-128 encryption Encryption Cipher AES-192 CBC AES-192 encryption AES-256 CBC AES-256 encryption F8926-GW-V1.0.0 en.four-faith.com Page 47 of 78...
Page 48: Ipsec
It will delete the connection Modify the configuration information for this Edit connection Action Delete the current tunnel and restart the tunnel Reconnect creation request The connection will initiate the tunnel Enable establishment request when reboot or reconnect F8926-GW-V1.0.0 en.four-faith.com Page 48 of 78...
Page 49 3. Detection: The configuration information for connection detection (DPD). Enable DPD Detection: Whether enable this function or not, check it means enable it. Time Interval: Set the time interval of DPD. Timeout: Set the timeout of DPD. F8926-GW-V1.0.0 en.four-faith.com Page 49 of 78...
Page 50: Gre
GRE (Generic Routing Encapsulation) protocol can encapsulate data packets of some network layer protocols, such as IP and IPX, to enable these data packets transport in another layer of network protocol. GRE adopts tunnel technology which is the third-layer tunnel protocol of VPN. F8926-GW-V1.0.0 en.four-faith.com Page 50 of 78...
Page 51 Turn off GRE keepalive function Retry times The maximum failure numbers of GRE keepalive Interval The data packet sending interval of GRE Hold Hold the device when failure happen Fail Action Restart Restart the device when failure happen F8926-GW-V1.0.0 en.four-faith.com Page 51 of 78...
Page 52: Security
Filter ActiveX: Click the check box to enable or disable this function. If refuse the ActiveX, you may not be able to open the website which programmed with ActiveX tools. ◆ Block WAN Requests Block Anonymous WAN Requests (ping): Click the check box to enable or disable F8926-GW-V1.0.0 en.four-faith.com Page 52 of 78...
Page 53 Limit L2TP Server Access: Click the check box to enable or disable this function. It limits the L2TP access request from WAN, up to 2 L2TP connections per minute for the same IP address. ◆ Log Management Outgoing Log Incoming Log F8926-GW-V1.0.0 en.four-faith.com Page 53 of 78...
Page 54: Access Restrictions
“Deny” means specific computers will be denied access to any internet service at specific times. “Filter” means specific computers will be denied access to specific websites at specific times. You can set up to 10 access policy that specific computers are denied access to internet F8926-GW-V1.0.0 en.four-faith.com Page 54 of 78...
Page 55 PCS, you can input a range of IP address. When you finish the modify, please click the “Save” button to save configurations, or click the “Cancel Changes” button to cancel it. F8926-GW-V1.0.0 en.four-faith.com Page 55 of 78...
Page 56: Url Filter
Allow to access the URL address which packets conform to complies with the rule the following rules Policy Discard packets Refuse to access the URL address which conform to the complies with the rule following rules F8926-GW-V1.0.0 en.four-faith.com Page 56 of 78...
Page 57: Packet Filter
TCP / UDP data packet filter SPorts The source port of data packet DPorts The destination port of data packet Source IP The source IP address of data packet Destination IP The destination IP address of data packet F8926-GW-V1.0.0 en.four-faith.com Page 57 of 78...
Page 58: Nat
For security reasons, you may need to restrict the port forwarding to those ports which are using. If you don’t want to use the port forwarding, please disable this function. F8926-GW-V1.0.0 en.four-faith.com Page 58 of 78...
Page 59: Dmz
Uplink (kbps): you can assign the uplink bandwidth in this field. In fact, it may be the 80%-90% of maximum bandwidth. Downlink (kbps): you can assign the downlink bandwidth in this field. In fact, it may be the 80%-90% of maximum bandwidth. F8926-GW-V1.0.0 en.four-faith.com Page 59 of 78...
Page 60: Classify
(10/100) * Uplink; (10/100) * Downlink Bulk 1000 bit (almost 0); 1000 bit (almost 0) 3.3.9 Application 3.3.9.1 Serial Applications F8926-GW embedded serial convert to TCP/IP program. The console port can be configured to ordinary serial port. F8926-GW-V1.0.0 en.four-faith.com Page 60 of 78...
Page 61 Software Software flow control Serial convert to UDP connection, include UDP (DTU) custom application layer protocols, as a four-faith IP Modem Pure UDP Standard serial converts to UDP connection Serial convert to TCP connection, include TCP (DTU) custom application layer protocols, as a...
Page 62: Lorawan Application
LoRaWAN data service center program uplink Serv_port_up port. Value range is 0-65535 and the default value is 1700. LoRaWAN data service center program downlink Serv_port_down port. Value range is 0-65535 and the default value is 1700 F8926-GW-V1.0.0 en.four-faith.com Page 62 of 78...
Page 63: Admin
Also, you can enable or disable the information pages of F8926-GW, so that you can protect it by password (input correctly username and password to open it). F8926-GW-V1.0.0 en.four-faith.com Page 63 of 78...
Page 64 Web GUI Management Enable F8926-GW, else you need input https://xxx.xxx.xxx.xxx:8088 (x means the access IP address, and 8088 means the web access port), F8926-GW-V1.0.0 en.four-faith.com Page 64 of 78...
Page 65 Parameters Options Description Enable Turn on remote firmware upgrade function Firmware Upgrade Disable Turn off remote firmware upgrade function Upgrade Server IP Configure upgrade server IP address Upgrade Server Port Configure upgrade server port F8926-GW-V1.0.0 en.four-faith.com Page 65 of 78...
Page 66: Keep Alive
“Save Shutdown” – You can save these commands to shutdown command. “Save Firewall” – You can save these commands to firewall command. “Save Custom Script” – Custom commands save in /tmp/custom.sh file, you can run or use the cron to call it. F8926-GW-V1.0.0 en.four-faith.com Page 66 of 78...
Page 67: Factory Defaults
3.3.10.5 Firmware Upgrade New firmware version can be found in en.four-faith.com, you can download it free, and then loading it into F8926-GW. If the device can work normally, there is no need download and upgrade new firmware version, unless new firmware version includes what new features you want.
Page 68 If you want to restore configuration file, please click the “Browse” button select the backup configuration file and then follow the system directions step by step. And click the “Restore” button to upload it. F8926-GW-V1.0.0 en.four-faith.com Page 68 of 78...
Page 69: Status
Show the serial application status of base station Application Total Available Show the available memory size of base station Memory Free Show the free memory size of base station Used Show the used memory size of base station F8926-GW-V1.0.0 en.four-faith.com Page 69 of 78...
Page 70: Wan
Show the IP Filter connections of base station Connections Network Active IP Show the active IP connections of base station, if Connections you click this link, it will show all active IP details 3.3.11.2 WAN F8926-GW-V1.0.0 en.four-faith.com Page 70 of 78...
Page 71: Lan
Local DNS The local DNS of LAN port ◆ Active Clients Item Parameters Description Host Name The host name of client IP Address The IP address of client MAC Address The MAC address of client F8926-GW-V1.0.0 en.four-faith.com Page 71 of 78...
Page 72: Wireless
The host name of DHCP client IP Address The IP address of DHCP client MAC Address The MAC address of DHCP client Client Lease Time The lease time of DHCP client 3.3.11.4 Wireless ◆ Wireless Status F8926-GW-V1.0.0 en.four-faith.com Page 72 of 78...
Page 73 The speed rate of wireless Encryption - Wireless encryption type Interface wl0 PPTP Status PPTP status ◆ Wireless Packet Info Item Parameters Description Received (RX) Have been received packets Transmitted (TX) Have been transmitted packets ◆ Wireless Nodes F8926-GW-V1.0.0 en.four-faith.com Page 73 of 78...
Page 74: Bandwidth
3.3.11.5 BandWidth ◆ Bandwidth Monitoring - LAN Abscissa: Time (byte/s), you can switch to bit/s by click Ordinate: Speed Rate (Kbps), you can switch up or follow by click ◆ Bandwidth Monitoring - WAN F8926-GW-V1.0.0 en.four-faith.com Page 74 of 78...
Page 75 Ordinate: Speed Rate (Kbps), you can switch up or follow by click ◆ Bandwidth Monitoring – Wireless (wl0) Abscissa: Time (byte/s), you can switch to bit/s by click Ordinate: Speed Rate (Kbps), you can switch up or follow by click F8926-GW-V1.0.0 en.four-faith.com Page 75 of 78...
Page 76: System Info
Wireless status Mode Wireless mode Network Wireless network mode SSID The name of wireless network Channel The channel of wireless network TX Power The Tx power of wireless Rate The speed rate of wireless F8926-GW-V1.0.0 en.four-faith.com Page 76 of 78...
Page 77 500KB Used Used memory. Buffers Buffer memory Cached Cache memory Active The size of buffer or cache page file in active state Inactive The size of buffer or cache page file in inactive state F8926-GW-V1.0.0 en.four-faith.com Page 77 of 78...
Page 78 Show the LoRaWAN server connection status The device Mac address GPS status Show the GPS status Longitude Show current longitude of F8926-GW Latitude Show current latitude of F8926-GW Altitude Show current altitude of F8926-GW F8926-GW-V1.0.0 en.four-faith.com Page 78 of 78...

This manual is also suitable for:

F8926-gw-w F8926-gw-fl F8926-gw-l

Four-Faith F8926-GW Series User Manual

Chapter 1 Product Introduction

Chapter 2 Installation

Chapter 3 Configuration