Brennenstuhl WA 3000 XS02 - WiFi Socket IP44 Operating Instructions

Table of Contents

Contents

1 SAFETY INSTRUCTIONS
2 INTENDED USE
3 INSTALLATION INFORMATION / DISTANCE TO SOURCES OF INTERFERENCE
4 SCOPE OF DELIVERY
5 TECHNICAL SPECIFICATIONS
6 DEVICE OVERVIEW
7 FUNCTION
8 PREPARATIONS
9 DOWNLOADING THE APP / BRENNENSTUHLCONNECT
10 COMMISSIONING THE WIFI SOCKET
11 COMPATIBLE WITH AMAZON ALEXA AND THE GOOGLE ASSISTANT
12 CLEANING THE DEVICE
13 DISPOSAL
14 SERVICE
15 MANUFACTURER
16 SIMPLIFIED EU DECLARATION OF CONFORMITY
17 Documents / Resources
- 17.1 References
- 17.2 Download manual

SAFETY INSTRUCTIONS

RISK OF DEATH AND ACCIDENTS FOR INFANTS AND CHILDREN!
Never leave children unattended with the packaging material. There is the danger of suffocation through ingestion or inhalation of small parts or films. Children often tend to underestimate the dangers. Keep the device away from children. It is not a toy.

This device can be used by children from 8 years as well as persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, provided that they have been given supervision or instruction concerning the safe use of the device and that they understand the resulting risks. Children must not play with the device. Cleaning and user maintenance must not be carried out by children without supervision.
The device is suitable for outdoor use, it complies with the protection class IP44.
Any splash-proof function in connection with a connector is only achieved if the connector is also protected against splashing water (IP44).
The adapter must be installed close to the device and be easily accessible.

RISK OF INJURY!

We will not assume any liability for material damage or personal injury caused by improper handling or non-observance of the safety instructions! In such cases, the warranty / guarantee will become null and void!
Any other use than those described in these instructions will lead to damage of the device. Do not undertake structural modifications to the device. Otherwise, safe operation cannot be assured.

ATTENTION! RISK OF ELECTRIC SHOCK!

Do not open the housing. The device does not contain any serviceable parts. In case of a malfunction, please contact the service. Have works at the power network carried out by a specialised electrician, in the de-energized condition only.
The device is not suitable for isolation. The load is not separated from the mains galvanically.
Do not commission the device if there is visible damage.
Do not connect several WiFi sockets in series.
In case of failures, unplug the device from the socket immediately.
De-energized only when disconnected.

ATTENTION! RISK OF FIRE!

Do not connect any end devices at the device the unsupervised switch-on of which could cause fire or other damage (e.g. iron).
Do not switch the device in an uncontrolled manner or without supervision.
Do not use an extension cable.
Make sure that the socket is installed close to the connected device, that it is easily accessible and that it is not operated while it is covered.
Avoid any overloading of the device.
Any overload may result in a risk of fire or damage to the device.
The maximum capacity is 3680 W.
Do not connect in series.

INTENDED USE

The WiFi socket is only intended to switch loads connected to the socket in indoor and outdoor areas on and off. The device complies with the protection class IP44 if the plug is splash-proof (IP44) as well.

INSTALLATION INFORMATION / DISTANCE TO SOURCES OF INTERFERENCE

This device works with the 2.4 GHz b/g/n WiFi protocol. The reach within buildings may strongly differ from the one in open areas.
Apart from the transmission power and the reception properties of the receivers, environmental influences such as air humidity and the structural situation on site play an important role.
The reach may be considerably reduced by:

Walls made of wood, plasterboard, concrete, reinforced concrete
Proximity to metal and conductive objects
Broadband interference, e.g. in residential areas (DECT phones, mobile phones, radio headphones, radio speakers, radio weather stations, baby monitoring systems)
Proximity to electric motors, transformers, power supply units, computers

SCOPE OF DELIVERY

x WiFi socket WA 3000 XS02 IP44
1 x operating instructions

TECHNICAL SPECIFICATIONS

Designation of the product:	WA 3000 XS02 IP44
Art. no.:	1 29486 0 (DE) / 1 29486 1 (FR)
Radio frequency:	2.4 GHz WiFi
Frequency band:	2.412-2.484 GHz
Max. transmitting power:	< 100mW
Wireless IEE standards:	IEEE 802.11b /g /n
Operating voltage:	230 V ~ 50 Hz
Switching power:	Max. 3000 W
Nominal current:	13A
Ambient temperature:	-10°C to 35°C
IP class:	IP44

Device corresponds to protection class I, contamination: 2, rated impulse voltage:
2500 V, Operating mode: S1, 1E4, PTI175, level: 3, one-pole switch-off, non-replaceable built-in fuse: Thermal fuse: 250V~ 2A 76°C Technical modifications reserved.

DEVICE OVERVIEW

DEVICE OVERVIEW
LED Status:

Constantly lit in blue: Device is connected to the Internet.
If the LED flashes blue, the device is in the teaching mode.
If the device is switched on (ON), the LED is lit in red.

FUNCTION

The WiFi socket is part of the brennenstuhl®Connect system which is controlled via the brennenstuhl®Connect app. The WiFi socket can be directly connected to the router.

PREPARATIONS

Connect the WiFi socket to an easily accessible socket. The local mains voltage must comply with the technical data of the WiFi socket (see "Technical data"). Before the commissioning, check the power consumption of the load that you want to connect to the WiFi socket. The maximum capacity is 3000 W.

DOWNLOADING THE APP / BRENNENSTUHL®CONNECT

The WiFi socket is controlled using the brennenstuhl®Connect app.
The app is available free of charge at the App Store and on the Google Play
Store. For the download and the installation, follow the instructions on the screen.

Google, Google Play and Google home are trademarks of Google LLC.
Apple and the Apple logo are trademarks of Apple Inc. App Store is a service mark of Apple Inc. Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its affliates.

COMMISSIONING THE WIFI SOCKET

Start the brennenstuhl®Connect app.
Using the "+" symbol, you can add new devices.
Use the article number in the device overview to select the device to be installed.
After plugging in the WiFi socket, check to see if the blue LED is flashing quickly (2x per second). If not, put the WiFi socket in teaching mode by unplugging it and plugging it back in again 3 times. When plugged in for the 3rd time, the WiFi socket enters teaching mode and the blue LED flashes quickly.
Follow the instructions in the app to connect the WiFi socket with your network.

COMPATIBLE WITH AMAZON ALEXA AND THE GOOGLE ASSISTANT

The device is compatible with Amazon Alexa and the Google Assistant. For Amazon Alexa, download the brennenstuhl®Connect Skill and search for the WiFi socket. For the Google Assistant, select the Google Home App and click "Add" » "Set-up device". Then follow the screen menu.

CLEANING THE DEVICE

shock hazard ATTENTION! RISK CAUSED BY ELECTRIC SHOCK!
Before cleaning, separate the device from the power network. Make sure that no liquid penetrates the device. Penetrating liquid may cause a short circuit.

Clean the device with a dry, non-linting cloth. In case of more serious contamination, you can slightly moisten the cloth.
Do not use solvent-containing detergents for the cleaning. Otherwise, the surface and labelling of the device may be damaged.
Never immerse the device in water or any other liquids. Otherwise, the device may be damaged.
Ensure that the device is completely dry before the next use.

DISPOSAL

The packaging is made of environmentally friendly materials which can be disposed of via the local recycling centres.

For possibilities of disposal of the used product, please contact your local or municipal administration.

When your product has come to the end of its working life, it should not be disposed of with the domestic waste in terms of environmental protection. Please dispose of correctly.
You can obtain further information on collection points and working hours from your competent administrative authority.

SERVICE

If you have questions concerning the product, please do not hesitate to contact us at www.brennenstuhl.com.
Phone: 00 800 48 72 0 74 1 (free of charge)

MANUFACTURER

Hugo Brennenstuhl GmbH & Co. KG
Seestraße 1-3 ∙ D-72074 Tübingen
H.Brennenstuhl S.A.S.
4 rue de Bruxelles ∙ F-67170 Bernolsheim
lectra technik ag
Blegistrasse 13 ∙ CH-6340 Baar
www.brennenstuhl.com

SIMPLIFIED EU DECLARATION OF CONFORMITY

We, the Hugo Brennenstuhl GmbH & Co. KG, herewith declare that the remote system type WA 3000 XS02 complies with the directives 2014/53/EU and 2011/65/EU. The complete text of the EU declaration of conformity is available at the following web address:
www.brennenstuhl.com/konformitaetserklaerung/ke_1294860.pdf www.brennenstuhl.com/konformitaetserklaerung/ke_1294861.pdf
This device complies with all legal, national and European requirements. All company names and product designations contained herein are trademarks of the respective owners.
All rights reserved.

Smart up your home.
www.brennenstuhl.com