Dynamic Configuration (Recommended); Static Configuration (Optional) - Netopia 3381-ENT Getting Started Manual

Dynamic configuration (recommended)
The Dynamic Host Configuration Protocol (DHCP), which enables dynamic addressing, is enabled by default in
the router. To configure your Macintosh computer for dynamic addressing do the following:
1. Go to the Apple menu. Select Control Panels and then
TCP/IP.
2. With the TCP/IP window open, go to the Edit menu and
select User Mode. Choose Basic and click OK.
3. In the TCP/IP window, select "Connect via: Ethernet" and
"Configure: Using DHCP Server."
Note: You can also use these instructions to configure other computers on your network to accept IP addresses
served by the Netopia 3381-ENT.
Static configuration (optional)
If you are manually configuring for a fixed or static IP address,
perform the following:
1. Go to the Apple menu. Select Control Panels and then
TCP/IP or MacTCP.
2. With the TCP/IP window open, go to the Edit menu and
select User Mode. Choose Advanced and click OK.
Or, in the MacTCP window, select Ethernet and click the
More button.
Sharing the Connection 4-5