Table 21: Key '6' Display In Prepayment Mode - Secure Liberty 100 Technical Reference Manual

No key press at the end of this display sequence will
cause the auto-cycle display to resume.
Key 7: Emergency Credit status and value
A short press of key '7' allows Users to see if Emergency Credit is made available to them; if available then the
following displays will allow enabling the Emergency Credit.
Title: Emergency Credit available
Followed by
Followed by
When Emergency Credit allowance is not made available or is enabled, a short press of key '7' will initiate the
display sequence comprising Emergency Credit status and Emergency Credit balance. After each set of
information comprising a title followed by its data, either a four (4) seconds wait or short press of the key will
advance the display to the next set of information as described below.
Title: Emergency Credit status
Followed by value
Page 80 of 116 Liberty 100 Smart Electricity Meter Technical Reference Manual

Table 21: Key '6' display in Prepayment mode

The display indicates that Emergency Credit is now
available for use.
Press key 'A' on the meter keypad to enable
Emergency Credit or press key 'B' to ignore. If the
Emergency Credit offer message is not
acknowledged in 10 seconds then the display goes
into sleep mode and will return by pressing any key
on the meter's keypad.
(timeout 4 secs)
The 1
indicating the Emergency Credit status and
Emergency Credit allowance balance.
(timeout 2 secs)
The examples indicate the following:
Emergency Credit cannot be enabled now,
Or
Emergency Credit is enabled,
Or
Emergency Credit is currently being used,
Or
st
set of displays associated with key 7
BGX501-767-R02