Page 1
Scope of Supply/Bill of Material & Mounting Drawings Part Number: H-ADV150-01-01-SL / H-ADV150-01-02 Part Description: Head Light Guard – HONDA ADV150 Installation / Parts List / Bill of Material for Mounting Copyright By SRC Design and Specification are subjected to change...
Cilp M6 (13) – 2 off, Bush Delrin M6 14x7 (12) – 2 off, Washer M6 (8) -2 off, Screw M6x25 (11) – 2 off, from the Bottom side. Copyright By SRC Design and Specification are subjected to change Page 3...
Page 4
Ensure Mounting symmetry and tighten the screws to torque as per specifications in the BOM table. Final Mounted condition of the Head Light Guard, is as shown in the drawing above. Copyright By SRC Design and Specification are subjected to change Page 4...
Vehicle. We have prepared this based on our experience and knowledge, related to the Vehicle, Part and its functional aspects. 3. SRC cannot guarantee the interchangeability of the parts to any other manufacturer’s accessory part. It is advised to the User, to inspect and ensure the original state of all other Vehicle parts.