Johnson Plastics Plus GTBC12 Instruction Manual

Insulated slap wrap for cans or bottles

Heat Transfer Insulated Slap Wrap for Cans Or Bottles

INSULATED SLAP WRAP FOR CANS OR BOTTLES- Heat Transfer (Garments and Fabrics)

GTBC12

GENERAL TONER HEAT TRANSFER PROCESS

Recommended Equipment & Accessories

• Heat Transfer Printer

• Heat Transfer Paper for Garments with paper instructions

• Swing-away style heat press

• Heat Tape

• Green Sponge Heat Pad

• Teflon sheet or Blowout paper

• Silicone Finishing Sheet

Refer to the Heat Transfer Paper Instructions for best results.

Time

35-45 seconds

Table of Contents

Need help?

Do you have a question about the GTBC12 and is the answer not in the manual?

Page 1 Heat Transfer Insulated Slap Wrap for Cans Or Bottles INSULATED SLAP WRAP FOR CANS OR BOTTLES- Heat Transfer (Garments and Fabrics) GTBC12 GENERAL TONER HEAT TRANSFER PROCESS Recommended Equipment & Accessories • Heat Transfer Printer • Heat Transfer Paper for Garments with paper instructions •...
Page 2 Recommended Settings Refer to the Heat Transfer Paper Instructions for best results. Temperature 365 °F Pressure Medium General Heat Transfer Instructions • Follow the Heat Transfer Paper Instructions for best results. • Preheat press to 310°F while preparing product. • Close the heat press while empty to heat the bottom heat platen for at least 5 minutes. •...
Page 3 o Slightly increase the press pressure when pressing the image to the garment. o Make sure the garment and transfer sheet is completely cooled to room temperature before rolling the transfer sheet off of the garment. • Pieces of the image stuck to the B-adhesive sheet while trying to peel the A and B sheets apart during the A-B marrying process.