Johnson Plastics Plus WT1624 Instructions

Heat transfer waffle weave towel

WAFFLE WEAVE TOWEL- Heat Transfer (Garments and Fabrics)

WT1624

GENERAL TONER HEAT TRANSFER PROCESS

Recommended Equipment & Accessories

• Heat Transfer Printer

• Heat Transfer Paper for Garments with paper instructions

• Standard Flat Heat Press- Swing-away style press recommended

• Heat Tape

• Silicone Finishing Paper

• Teflon sheet or Blowout paper

Refer to the Heat Transfer Paper Instructions for best results.

Time

25-35 seconds

Temperature 305-315°F

Heat Transfer Waffle Weave Towel

Table of Contents

Need help?

Do you have a question about the WT1624 and is the answer not in the manual?

Page 1 Heat Transfer Waffle Weave Towel WAFFLE WEAVE TOWEL- Heat Transfer (Garments and Fabrics) WT1624 GENERAL TONER HEAT TRANSFER PROCESS Recommended Equipment & Accessories • Heat Transfer Printer • Heat Transfer Paper for Garments with paper instructions • Standard Flat Heat Press- Swing-away style press recommended •...
Page 2 Recommended Settings Refer to the Heat Transfer Paper Instructions for best results. Pressure Light-moderate General Heat Transfer Instructions • Follow the Heat Transfer Paper Instructions for best results. • Preheat press to 305-315°F while preparing product. • Close the heat press while empty to heat the bottom heat platen for at least 5 minutes. •...
Page 3 • Air dry recommended, can be tumble dried on low • Do not use static sheets. This will cause the microfiber to lose its electromagnetic charge. Tips and Tricks • For best image placement, utilize the product template found on the product page on JPPlus.com. Troubleshooting •...
Page 4 To order more of this product, see similar products and much more, please visit jpplus.com. For additional product support and troubleshooting, please contact JPPlus Advanced Support Team: • Phone: 419-500-4877 • Email: ast@jpplus.com • Schedule an appointment: https://jpplusadvancedsupport.setmore.com/...

Wt1624-ea