Operation - Easy@Home PTC-156 User Manual

Operation

Control
Handle
1
Thermostat knob
2
Fan Setting
3
Tip-over Safety Switch
4
(on bottom)
Air Intake
5
Power Indicator
6
Air Outlet
7
Operation
1. Plug into a standard 120V AC, 60 Hz source.
2. Your heater is equipped with a 4 position power switch
(fig. C)
3. Set the power switch to maximum (II) for fast warm-up of a
room. Once the room temperature is comfortable, select a
lower setting to save electrical consumption and to prevent
the room from becoming too warm.
4. Adjust the thermostat to maximum and select the desired
power setting. Once the room temperature is comfortable,
rotate the thermostat counterclockwise till the heater shuts
off. The thermostat will now maintain the temperature by
cycling the heater on or off. During particularly cold weather,
the low power setting may be insufficient to satisfy the
thermostat. Select a higher setting for these periods.
14
C
Functions
Use the carry handle to transport the device.
Low to high temperature.
set for Off, Fan only, 750 Watts and 1500 Watts.
This switches the device off automatically as
soon as it tilted or lifted.
Cool air into the heater.
Indicate power On.
Air Outlet