Table of Contents
Advertisement
®
MAGNUM PRO
CURVE HDE FCAW HYPERFILL
TROUBLESHOOTING
HOW TO USE TROUBLESHOOTING GUIDE
WARNING
Service and Repair should only be performed by Lincoln
Electric Factory Trained Personnel. Unauthorized repairs
performed on this equipment may result in danger to the
technician and machine operator and will invalidate your
factory warranty. For your safety and to avoid Electrical
Shock, please observe all safety notes and precautions
detailed throughout this manual.
This Troubleshooting Guide is provided to help you locate
and
repair possible machine malfunctions. Simply follow the
three-
step procedure listed below.
Step 1.
LOCATE PROBLEM (SYMPTOM).
Look under the column labeled "PROBLEM
(SYMPTOMS)". This
column describes possible symptoms that the machine
may
exhibit. Find the listing that best describes the symptom
that the
machine is exhibiting.
Step 2.
POSSIBLE CAUSE.
The second column labeled "POSSIBLE CAUSE" lists the
obvious
external possibilities that may contribute to the machine
symptom.
Step 3.
RECOMMENDED COURSE OF ACTION
This column provides a course of action for the Possible
Cause,
generally it states to contact you local Lincoln Authorized
Field
Service Facility.
If you do not understand or are unable to perform the
Recommended Course of Action safely, contact your local
Lincoln Authorized Field Service Facility.
WARNING
ELECTRIC SHOCK can kill.
•
Turn off machine at the disconnect
switch on the rear of the machine and
remove main power supply connections
before doing any troubleshooting.
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your
Lincoln Authorized Service Facility for technical troubleshooting assistance before you proceed.
WWW.LINCOLNELECTRIC.COM/LOCATOR
Observe all Safety Guidelines detailed throughout this manual
E-1
TROUBLESHOOTING
Advertisement
Table of Contents
