Safety; Environmental; Control Panel; Leds - Epson TM-U220 Product Information Manual

Serial I/F Communications Settings
Function
Baud rate
Parity
Handshaking
Data length

Safety

EMI FCC/ICES-003 Class A
Safety standards UL 609501950
CSA C22.2 No. 95060950-00
(Tested using the EPSON AC adaptor C.)

Environmental

Temperature Operating
Storage
Humidity 10 – 90% (no condensation)
(Storage conditions are without paper and ribbon cassette.)

Control Panel

LEDs

POWER
On when power is on.
ERROR
On when printer is offline. Off when printer is online. Flashes
during an error.
PAPER OUT
On when the printer is out, or nearly out, of paper. Flashes
during the printer self-test

Buttons

FEED
This button feeds roll paper or starts a self-test.
POWER
Turns on printer power.
Value
1200 bps 2400 bps
4800 bps 9600 bps
19200 bps —
None Odd
Even —
DSR/DTR XON/XOFF
7 bits 8 bits
32 – 122° F
14 – 122° F

Loading Paper

Note: Only use roll paper that meets specifications.
Do not use rolls with paper ends glued to the core.
Be careful not to touch the manual cutter. It is sharp.
1. Turn on the printer.
2. Using the tab shown below, open the paper roll cover.
3. For Type A only, open the unit using the unit open lever
shown at the right below.
4. Remove the used paper core, if there is one.
For Type A only, remove the paper take-up spool, and then
open the unit and remove any used paper core.
5. Using scissors, cut the leading edge of the paper straight, as
shown at the top left in the illustration below.
6. Insert the paper roll as shown on the right below.
Note: If you are using 2-ply paper, be sure that the top and bottom
layers are aligned at the paper exit.
7. For Type A only, pull out enough paper to reach the
bottom front of the printer; then close the unit as shown at
the left below.
8. For Type A only, insert the end of the bottom layer of paper
(the journal paper) into the paper take-up spool, and insert
the spool back into the printer. Be sure the paper is aligned
with the spool's flange.
5/03
EPSON TM-U220
EPSON TM-U220 - 3