Volume Config - Heads Up Technologies XMR100 Installation Manual

H E A D S U P T E C H N O L
Release Version:
Component ID
OIB Sw 00
OIB Config 00
Receiver Sw XX
Audio DB XX
Ctrl Head Sw 63
Release Version:
Component ID
OIB Sw 00
OIB Config 00
Receiver Sw XX
Audio DB XX
Ctrl Head Sw 63
Notes:
1. Release versions prior to 1.13 do not provide the ability to query the system for this
information and are not shown.
2. Component Descriptions:
a. OIB Sw – Control bus ID address (Always 00) and software date of the OIB
(Operations Interface Board).
b. OIB Config – The CAN interface configuration as a checksum intended for factory
information use only.
c. Receiver Sw – Control bus ID address and software date for each installed
receiver board.
d. Audio DB – Date of the XM channel announcement audio database release at the
indicated control bus ID address.
5.3.2

Volume Config

Pressing the "VOLUME CFG" key shows the setting of the system default audio
playback configuration strap inputs. Only the three inputs that affect the default volume
are shown.
XMR-3
Rev. C, 04/05/06
O G I E S
1.13 1.14
Feb 23 2005 Feb 23 2005
Feb 23 2005 Mar 3 2005
Feb 23 2005 Mar 3 2005
Feb 23 2005 Mar 3 2005
1.17
Feb 27 2006
Feb 27 2006
Feb 27 2006
May 3 2005
Installation Manual
1.15
Date
May 3 2005
See Notes
May 3 2005
May 3 2005
May 3 2005
Date
See Notes
XM Radio
1.16
Dec 5 2005
Dec 5 2005
Dec 5 2005
May 3 2005
Page 28 of 31