H E A D S
U P
T E C H N O L
5.0 MAINTENANCE
Due to the complexity of supporting multiple user interface options, this section only
applies to systems equipped with the XMC100 controller. For systems that are
controlled with a CEMS, please insure that you are familiar with the make and model
of the CEMS equipment before contacting Heads Up Technologies. Refer to the
CEMS provider as required.
5.1 XM Signal Quality Check
When pressing the "
information page. This information does not accurately reflect system performance
since it indicates the worst case satellite signal source. A more accurate signal status
page is available when entering the maintenance access code described below.
5.1.1
Enable Maintenance Access
Using a PDA stylus (or similar object) enter code above using the hidden keys. For each
key press insure a key press "beep" is heard from the controller.
XMR-3
Rev. C, 04/05/06
O G I E S
Important Note
Important Note
?
" key twice, the XMC100 displays the standard signal quality
Installation Manual
Hidden Keys, Maintenance
Mode Access Code:
1-4-2-3-2-4-3-1-3-1
Page 25 of 31
XM Radio