Use The Oral Irrigator - Oromed ORO-DENT PRO Manual

USE THE ORAL IRRIGATOR

1. Attach nozzle onto the unit. (Fig. 2)
2. Open the water tank cap to fill the tank In-
sert with water which temperature not exceed
40ºC, then close the cap. (Fig.3)
3. Or, Slide the water tank down off the unit, fill
the tank with water which temperature not ex-
ceed 40ºC, then attach the tank onto the unit.
(Fig. 4)
4. Press "Mode" key to select the mode you de-
sired. During irrigating, you can change the
working mode. (Fig. 5)
Normal: for normal cleaning.
Soft: for gentle cleaning of sensitive gums.
Pulse: for cleaning and massaging the gums.
5. Hold the unit in an upright position with nozzle
tip point toward your teeth.
6. Keep your mouth opened slightly so that the
water can flow out.
7. Press "On/Off" key to start irrigating. (Fig. 6)
1). Directing the water jet flow at a 90-degree
angle to the teeth and gums.
MODE
2). Directing the water jet slowly along NOR-
MAL the teeth. SOFT
3). Directing the water jet along the gum PUL-
SE line with the nozzle tip at a 90-degree
CUSTOM / CH angle to the gum tissue.
4). Cleaning between the teeth and around
any braces, crowns or bridgework thoro-
ughly.
8. Press "On/Off" key and then press the nozzle
release button to replace other nozzle when
you need.(Fig.7)
9. Once irrigating complete, press "On/Off" key
again to turn off the device.
– 11 –
Slide
Down