Table of Contents

Advertisement

Available languages

Available languages

10. Filter
11. Water Tank Ring
12. Water Tank
13. Water Tank Cap
Note:
There may be some liquid remaining inside the main appliance before use (tank,
water suction tube, etc), this is the remaining distilled water that was used for the
performance (water flow) test, so there are no health concerns.

HOW TO USE

Charging the device (Fig. 1)
1. Take the charger base cover down and
insert the appliance plug securely into
the appliance socket (made sure no liquid
remaining inside the socket before insert
the appliance plug).
2. Insert the charging adaptor securely into
the power outlet.
3. The "CH" indicator blinks when the devi-
ce is charging and it will turn off after it's
fully charged.
4. Recover the cover onto charger base
again after charging finnished.
Note:
If the "CH" indicator is blinking during or
after an irrigating, that means the battery
need to be recharged. An full recharging will
take about 24 hours.
– 10 –
Fig.1

Advertisement

Table of Contents
loading

Table of Contents