Page 3
• Använd lämpliga kläder. Använd inte lösa Montera utsuget och packningen (I) till kläder, halsband, handskar, smycken etc. uppsamlarstommen, som visas i fig 3 och fig 4. • Ta bort justeringsknappar och nycklar. Innan du slår på maskinen, gör det till Packning, I vana att kontrollera att alla inställningsnycklar och nycklar har tagits...
Page 4
Installera nu det övre påsstödet på uppsamlarstödet enligt fig 7. Fäst ena änden på slangen till uppsamlarstommen och den andra änden till hålet i sidan på uppsamlaren och fäst med de två slangklämmorna enligt fig 8. Placera uppsamlar- och filterpåsarna på uppsamlaren och fäst med banden som visas i fig 9.
Page 7
• A: Hose • I: Gasket Contact PELA Tools • B: Collector body • J: Four wheels Solängsvägen 13 and fan / motor • K: Nuts, screws, SE-513 70 Borås unit washers, spring Telefon: 033-202650 • C: Collector washers and E-mail: order@pelatools.se...
Page 8
• Wear suitable clothing. Do not wear loose Fit the extractor and the gasket (I) to the clothing, necklaces, gloves, jewellery, etc. collector body, as shown in Fig. 3 and Fig. 4. • Remove adjustment buttons and keys. Packning, I Before turning on the machine, make it a habit to check that all the setting keys have been removed.
Page 9
Now install the upper bag support on the collector support according to fig. 7. Now attach one end of the hose to the collector body and the other end to the hole in the side of the collector and fasten with the two hose clamps according to Fig.