Do-Not-Disturb; Door And Relays Functions - Auerswald COMmander 6000 Short Operation Instructions

Function

Do-not-Disturb

Enable Do-not-Disturb (Call protection)
Disable Do-not-Disturb (Call protection)

Door and Relays Functions

Start door call
Open door
Start Query from door call
Switch relay on
(switches off automatically after configured
on-time)
Switch relay on
Switch relay off
i Internal number of the individual telephone (** will be added in front of the number for direct exchange line telephones)
g Internal number of the group (** will be added in front of the number for direct exchange line telephones)
e Exchange line access number + external number (for direct exchange line telephones the exchange line access number can be left out)
k Short-code dialling number (** will be added in front of the short-code dialling number for direct exchange line telephones)
t Internal number of the door (** will be added in front of the number for direct exchange line telephones)
For explanations concerning abbreviations and symbols see
COMmander 6000/6000R/6000RX - Firmware Version 5.6A - Short Operation Instructions 03 11/12
Device Programming Sequence
a/b, S /U
0 P0 BB8C 21 1 B
a/b, S /U
0 P0
BB8C 21 0 B
t
a/b, S /U
0 P0
a/b, S /U
0 P0
FB
i
g
a/b
e
F
k
a/b, S /U
0 P0 BB8
Ext
a/b, S /U
BB8
0 P0
Ext
a/b, S /U
0 P0 BB8
Ext
page 6.
C 26 R B
E
C 26 R C 1 B
E
C 26 R C 0 B
E
Additional Information
Authorization necessary
Use external PIN only for external
access!
For relay with the operating mode
stairway light, door opener, alarm
signalling light, siren, PC relay.
R = ... (No. of the relay (2-4-digit))
Authorization necessary
Use external PIN only for external
access!
For relay with the operating mode
configuration dependent.
R = ... (No. of the relay (2-4-digit))
Authorization necessary
Use external PIN only for external
access!
For relay with the operating mode
configuration dependent.
R = ... (No. of the relay (2-4-digit))
Authorization necessary
13