Remote Power On/Off Control Connection - Toa P-3548D Instruction Manual

6.4. Remote Power ON/OFF Control Connection

For cable wiring to the removable terminal block, refer to p. 12.
6.4.1. Remote power control input terminal connection
With the P-3548D's power turned OFF, it can be remotely turned ON from the optional A-3500D series or
A-3600D series Mixer amplifier by making the Remote IN-OUT terminal connections as shown below.
(This remote control operates only when the P-3548D's power is turned OFF.)
P-3548D
Control input signal specification: Short-circuit current: 10 mA or less, open voltage: 35 V DC or less
6.4.2. Remote power control output terminal connection
Use this terminal when remotely controlling other
equipment. This terminal is activated when the unit is
turned ON.
Control output signal specification: Open collector output (polarized), withstand voltage: 30 V DC or less,
10
current: 25 mA or less
The figure represents the A-3500D series.
To other equipment' s
remote power control input terminal
A-3500D series
A-3600D Series