SonicWALL Zero-Touch Deployment Manual

SonicWall
Deployment Guide
March 2019
SonicWall network security appliances are Zero-Touch enabled. Zero-Touch makes
it easy to register your unit and add it to SonicWall Capture Security Center or
SonicWall GMS On-Premise for management and reporting. This document
describes the Zero-Touch deployment process.
Topics:
• Deploying with Zero-Touch (CSC Management)
• Deploying with Zero-Touch (GMS On-Premise)
Deploying with Zero-Touch (CSC Management)
1) Register:
• Point your browser to
account.
• In Capture Security Center, click the mySonicWall tile to launch the MySonicWall Dashboard.
• Click the Add Product button
number of your SonicWall appliance. Click Confirm.
You can find the serial number and authentication code on the shipping box or appliance label.
• In the REGISTER A PRODUCT dialog, fill in the Friendly name and Authentication code, and select the
Tenant Name. By default, all products are placed under SonicWall Products Tenant.
• Click Register.
2) Enable Zero-Touch and CSC Management and Reporting:
• MySonicWall recognizes your appliance model and displays the Zero Touch option. Enable Zero Touch
and then click Register again. A success message is displayed to indicate Zero-Touch readiness.
• In MySonicWall, navigate to Product Management > My Products, select the appliance, and click the Try
button to enable the license for CSC Management and Reporting (if not enabled already). A success
message displays.
3) Connect and Power On:
NOTE: The appliance must be able to obtain an IP address via DHCP from the WAN connection or ISP
modem. If you need to use a static IP address, refer to the Quick Start Guide for your appliance.
• For a wireless appliance, connect the antennas.
®
Zero-Touch
https://cloud.sonicwall.com
to launch the QUICK REGISTER dialog and then type in the serial
and log into your MySonicWall account or create an
SonicWall Zero-Touch
Deployment Guide
1