Element Cycling; Operating The Cooking Elements; Adjust Burner Size; Cooking Element(S) - Monogram ZEU30 Owner's Manual

USING YOUR COOKTOP

ELEMENT CYCLING

Surface elements will cycle on and off to maintain the
temperature you have selected. All radiant surface
elements have a temperature limiter that protects the
glass cooktop from getting too hot, this is normal. The
temperature limiter may cycle the elements off more
frequently if:

OPERATING THE COOKING ELEMENTS

Turn Burner(s) On: Touch and hold
On/Off pad about half a second. A
chime can be heard with each touch
to any pad.
Power level can be selected in any of
the following ways:
1. Swipe the gray arc (on the
graphics) to the desired power
level, or;
2. Touch Anywhere along the gray
arc, or;
Gray Arc
Swipe Area
LED
Lights

ADJUST BURNER SIZE

The burner ring size is adjustable on some elements.
The ring size can be selected by pressing the burner ring
graphic.
10
3. Touch + or - pads to adjust power level, or;
4. Shortcut to Hi: Immediately after turning unit on, touch
the + pad, or;
5. Shortcut to Low: Immediately after turning unit on, touch
the - pad.
Single Surface
Element
Dual Surface Tri-Ring Surface
Element Element
49-2001137 Rev. 1