Element Cycling; Operating The Cooking Elements; Adjust Burner Size; Cooking Element(S) - Monogram ZEU30 Owner's Manual

USING YOUR COOKTOP

ELEMENT CYCLING

Surface elements will cycle on and off to maintain the
temperature you have selected. All radiant surface
elements have a temperature limiter that protects the
glass cooktop from getting too hot, this is normal. The
temperature limiter may cycle the elements off more
frequently if:

OPERATING THE COOKING ELEMENTS

Turn Burner(s) On: Touch and hold On/Off pad about half
a second. A chime can be heard with each touch to any
pad.
Power level can be selected in any of the following ways:
1. Swipe the gray arc (on the graphics) to the desired
power level. There is no sensor on the LEDs, or;
2. Touch Anywhere along the gray arc, or;
3. Touch + or - pads to adjust power level, or;
4. Shortcut to Hi: Immediately after turning unit on, touch
the + pad, or;
5. Shortcut to Low: Immediately after turning unit on, touch
the - pad.

ADJUST BURNER SIZE

The burner ring size is adjustable on some elements.
The ring size can be selected by pressing the burner ring
graphic.
10
■ T he pan boils dry.
■ T he pan bottom is not flat.
■ T he pan is off-center.
■ T here is no pan on the element.
LED
Lights
Single Surface
Element
Gray Arc Swipe Area
Gray Arc
Swipe Area
Dual Surface Tri-Ring Surface
Element Element
49-80825 Rev. 2