2. Attach any necessary cables and/or antennas to the AP.
3. Attach the AP to the secured mounting adapter as shown in
Figure
3.
a. Align the AP with a mounting adapter, placing the AP so that it's mounting tabs are at an angle of
approximately 30 degrees to the adapter.
4. Pushing toward the wall, rotate the AP clockwise until it clicks into place (see
Figure
3)
Figure 3 Attaching the AP to the Mounting Bracket
Figure 4 Completed Installation
www.arubanetworks.com
1344 Crossman Avenue
Sunnyvale, California 94089
Phone: 408.227.4500
© 2013 Aruba Networks, Inc. All rights reserved.
Fax 408.227.4550
2
AP-220-MNT-W1 Wall Mount Kit
| Installation Guide