Configuring the SonicWALL DHCP Server
8. The Optional-SonicWALL DHCP Server window configures the SonicWALL DHCP
Server. If enabled, the SonicWALL automatically configures the IP settings of computers
on the LAN. To enable the DHCP server, select the Enable DHCP Server check box, and
specify the range of IP addresses that are assigned to computers on the LAN.
If the Enable DHCP Server check box is not selected, the DHCP Server is disabled. Click
Next to continue.
Configuration Summary
9. The Configuration Summary window displays the configuration defined using the
Installation Wizard. To modify any of the settings, click Back to return to the
Connecting to the Internet window. If the configuration is correct, click Next to
proceed to the Congratulations window.
Performing the Initial Configuration Page 31