Hardware Features; Router Stand - NETGEAR DGN2200M User Manual

N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition

Hardware Features

This section acquaints you with the physical aspects of your N300 Wireless ADSL2+ Modem
Router.

Router Stand

Since the router is a vertical-only device, use the stand to position your wireless modem
router upright.

To assemble the router and its stand:
1. Insert the tabs of the stand into the slot on the bottom of your router.
2. Place your router near an AC power outlet in a location where you can connect cables as
needed for your home network.
If you are planning to connect to the Internet using mobile broadband, the router needs to
be located where you can receive a strong mobile broadband signal while indoors.
To mount the router to a wall, see
For additional considerations on router placement, see
page 13.
Wall-Mounting on page 114.
Internet Configuration
8
Position Your Wireless Router on