NETGEAR DGN2200M User Manual page 27

N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
• Cancel. Discard changes.
• Refresh. Update the connection status.
Table 4. Mobile Broadband Settings fields
Fields and check boxes
User Name
Password
Country
Internet Service Provider
Access Number
PIN code
APN
PDP type
Connect automatically at startup
Reconnect automatically when
connection is lost
Roaming automatically
Wireless Button Configuration
Connection status
1. These fields and check boxes depend on the network.
1
Description
Internet account login user name.
Internet account password for authentication.
Select your country from the drop-down list.
Select your Internet service provider from the drop-down list.
The remote site's phone number.
PIN code of the SIM card, where applicable.
Access point name.
Select the type of packet data protocol:
• IP
• PDP-IP
• PPP
• PPP-IP
When this check box is selected, the modem automatically connects
to the network when powered up. This should be selected after login
information is provided.
When this check box is selected, the modem attempts to reconnect to
the network when the connection is lost. Under normal situations, this
setting check box should be selected.
When this check box is selected, the unit might roam to any available
operator in range and might incur roaming charges.
Select the option to determine the behavior of the WPS button on the
front panel when it is pressed.
• Control WiFi Only: Pressing the button toggles the WiFi function.
If WiFi is turned on, pressing the button turns off the WiFi. Pressing
it again turns on the WiFi. This function is available only if the WiFi
function is enabled. The wireless broadband function is unaffected.
• Control Both WiFi and Wireless Broadband: Pressing the button
toggles both the WiFi function and wireless broadband at the same
time. If WiFi is turned on, pressing the button turns off the WiFi. At
the same time, the wireless broadband connection is disconnected.
If you press the button again, WiFi is turned on, and the router
attempts to reestablish the wireless broadband connection.
Depending on the coverage, wireless broadband coverage might or
might not be connected successfully.
Current WAN port status.
Internet Configuration
27