Table of Contents
Advertisement
Attaching the Strap
Attach the strap as illustrated below.
Be sure the strap does not obstruct the film ejection slot.
Placing on the Stand
The printer can be placed on the stand. When using the stand with
the printer, be sure the film ejection slot is facing up.
Installing the INSTAX LINK WIDE Smartphone
App
Please install the free INSTAX LINK WIDE Smartphone App on your
Smartphone before using the printer. This is required for use of all
available product features.
• If you are using an Android OS Smartphone, please search for
the INSTAX LINK WIDE Smartphone App in the Google Play Store
and install it.
*Requirements for Android OS Smartphones: Android Ver. 5.0
or higher with Google Play Store installed
• If you are using an iOS Smartphone, please search for the
INSTAX LINK WIDE Smartphone App in the App Store and install it.
*Requirements for iOS Smartphones: iOS Ver. 10.0 or higher
• Depending on your Smartphone model, you may not be able to
use the INSTAX LINK WIDE Smartphone App even if you have
installed it and your Smartphone meets the above
requirements.
Access the INSTAX LINK WIDE App download site by scanning
the below QR codes for the latest information on system
requirements�
iOS
4
Android OS
Charging the Battery
Be sure to properly attach the Micro USB cable as indicated.
Note that USB AC adapter is not included,
but is typically provided with your
Smartphone or otherwise purchased
separately.
Connect the printer with a USB AC adapter (not included with
INSTAX LINK WIDE printer) using the supplied Micro USB cable,
then connect the USB AC adapter to an indoor power outlet.
• You can print an image while charging is in progress.
• Charging time is approximately 80 to 120 minutes.
Charging status indication with the LED
Indication
LED lights up in white
LED flashes in white
Check the charging status with your Smartphone when connected
with the free INSTAX LINK WIDE App.
For instructions on how to download the App, please see the
Installing the INSTAX LINK WIDE Smartphone App section on this
page.
* When the printer is turned off, the LED goes off after the
charging is completed. When the printer is turned on and not
connected with the App, the LED lights up in white after the
charging is completed.
Charging from a PC:
• Connect the printer and PC directly using the supplied Micro
USB cable. Insert the Micro USB cable into the Micro USB port
of the printer and the USB port of the PC. Do not connect via
a Micro USB hub or keyboard.
• If the PC goes into sleep mode while charging, charging is
discontinued. To continue charging, exit sleep mode and then
reconnect the Micro USB cable.
• The battery may not be able to charge depending on the
specifications and settings or conditions of the PC .
Notes
• The battery has not been fully charged at the factory. Be sure
to charge the battery before using the printer.
• The battery cannot be removed.
• For notes about the battery, see "Common Sense Printer Care".
(p.11)
To an indoor
power outlet
Charging status
Not charging
Charging
Advertisement
Table of Contents
