Before Use
Before using the printer, check the following.
Supplied Accessories
• Micro USB cable for charging
(1)
(BOD700-101)
The battery has not been fully charged at the factory. Be sure
to charge the battery before using the printer.
Notes on Disposing of the Printer
A built-in lithium ion battery is used for this printer�
When you dispose of the printer, follow your local regulations and
dispose of it properly.
For proper disposal in the United States at product end-of-life,
please contact 1-800-800-3854 Option #1 INSTAX.
For proper disposal in Canada at product end-of-life, please
contact 1-800-461-0416.
Do not attempt to remove the built-in battery. Injury may result.
Read "IMPORTANT SAFETY NOTICE" (Page 11 ) for safety use.
3
• User's Guide (1)
• Limited Product Warranty (1)
• Stand (1)
• Strap (1)
Part Names
Before using the printer for the first time, be sure to fully charge
the battery.
Front
1
2
3
Rear
6
1
Film ejection slot
2
Power button/LED
1
3
Strap holes
4
Reset button
2
5
Micro USB port
6
Film door lock
7
Film door
For details on LED indication status, see pages 4 and 6.
1
If the printer does not work properly, press the reset button to
2
reset the printer.
4
5
7