Table of Contents
Advertisement
IMPORTANT SAFETY NOTICE
This product has been designed with safety in mind, and to
provide safe service when handled correctly and in accordance
with the instructions in this User's Guide� It is important that
both the product and the INSTAX WIDE instant film pack are
handled properly and used only to print photos as instructed in
this User's Guide and in the INSTAX WIDE instant film pack
instructions� For your ease and safety, strictly follow the
instructions in this User's Guide� Keep this User's Guide in a safe,
convenient place for easy future reference as needed�
This symbol indicates danger, which could result in product
damage, injury or death. Follow the instructions indicated to avoid
damage to the printer or injury.
If one of the following cases occur, immediately unplug the
Micro USB cable, turn the printer off and refrain from any
further use of the printer:
• The printer becomes hot, emits smoke, has a burnt smell, or
otherwise seems abnormal�
• The printer is dropped into water, or foreign objects like
water, sand, dirt or metal get inside the printer�
The printer has a built-in battery� Do not subject it to heat,
expose it to an open flame, drop it, or otherwise apply impact
to it� Doing so may cause the printer to explode, resulting in
injury�
Never attempt to take this product apart� You may be injured�
All repairs should be handled solely by Fujifilm� Injury may
result from attempts to self-assess or repair this printer�
If this product is dropped or damaged so that the inside is
showing, do not touch it� Contact Fujifilm�
Do not touch any parts which are inside the film door� You may
be injured�
Never get this product wet or handle it with wet hands� Doing
so may result in electric shock and injury�
Promptly unplug the Micro USB cable once battery is fully
charged�
Keep out of the reach of small children� This product could
cause injury in the hands of a child�
Do not cover or wrap the printer or the AC power adapter in a
cloth or blanket, or otherwise place the printer in the sun or
an environment where heat may build up� This could distort
the casing or cause a fire�
The "CE" mark certifies that this product satisfies the
requirements of the EU (European Union) regarding
safety, public health, environment and consumer
protection. ("CE" is the abbreviation of Conformité
Européenne.)
11
WARNING
WARNING
WARNING
Common Sense Printer Care
■ Handling the Printer and Battery
• CAUTION - Do not expose to excessive heat such as sunshine,
fire or the like, that can result in an explosion or the leakage of
flammable liquid or gas during use, storage or transportation or
disposal.
• CAUTION - Do not dispose of a battery into fire or a hot oven, or
mechanically crush or cut a battery, that can result in an
explosion.
• CAUTION - Do not subject to extremely low air pressure at high
altitude that may result in an explosion or the leakage of
flammable liquid or gas.
■ Printer Care
1. Do not open the film door until you have used up the film;
otherwise, the rest of the film is exposed and turns white�
The film can no longer be used�
2. Your printer is a precision instrument. Do not get it wet or drop
it. Also, do not expose it to sand, dust or dirt.
3. Do not use cleaning products or solvents such as those with
bleach or alcohol to remove dirt.
4. Keep the film chamber and printer interior clean to avoid
damaging the film.
5. In hot weather, do not leave your printer in hot places such as
in a car or on the beach. Do not leave it in damp places or
places where weather exposure could result.
6. Moth repellent gas such as naphthalene may affect your
printer and prints. Store your printer and photo prints in a
place where exposure to harmful cleaning or other household
elements will be avoided.
7. Note that the temperature range within which your printer can
be used is 5°C to 40°C (41°F to 104°F).
8. Take great care to ensure that your prints do not violate
copyright, image rights, privacy or other personal rights and
do not offend public decency. Actions that violate the rights of
others, are contrary to public decency or constitute a nuisance
may be punishable by law or otherwise legally actionable.
9. This printer is designed for household use. It is not suitable for
commercial printing which requires a large amount of printing.
■ Charging the Battery
The battery is not charged at shipment� Charge the battery
completely before use�
Charge the battery using the supplied Micro USB cable.
Charging times will increase at ambient temperatures below
10°C (50°F) or above 35°C (95°F). Do not attempt to charge the
battery in environments with temperatures above 40°C (104°F);
at temperatures below 5°C (41°F), the battery will not charge.
■ Battery Life
At normal temperatures, the battery can be recharged about
300 times. A noticeable decrease in the length of time the
battery will hold a charge indicates that it has reached the end
of its service life.
■ Caution: Handling the Battery
The battery and printer body may become warm to the touch
after extended use. This is normal.
Advertisement
Table of Contents
